1
B22W-202010
1
-
3
CHAPTER 1 INTRODUCTION1022H TRACTOR
1. INTRODUCTION
This tractor service manual is for qualied service personnel engaged in servicing and overhauling 1022H
TRACTOR. Use of this publication is not recommended for eld operators since they usually do not have access
to special tools and shop equipment essential for most servicing.
Servicing procedures outlined herein contain sufcient information to return all component parts of a tractor to
new condition. In discussion of each component parts, it is assumed that a complete overhaul is been performed
consequently,
complete disassembly and reassembly are outlined. The mechanic is relied upon to decide how far disassembly
must be carried when complete overhaul is not required.
Study unfamiliar service procedures thoroughly and clearly understood before attempting disassembly. Specic
data essential for proper overhaul, such as running clearances and torque value, have been provided in interline
of Inspection and reassembly procedures of each group section.
This manual was compiled from latest information available at time of publication.
Manufacturer reserves the right to make changes at any time without notice.
Whenever the terms "left“ and "right" are used, They means as viewed by the operator when seated in the
operator's seat.
,OOXVWUDWLRQ$
)URQW5HDU/HIWDQG5LJKW3RUWLRQ
)URQW/HIW
5LJKW
5,*+77851
&/2&.:,6(
/()77851
&2817(5&/2&.:,6(
5HDU
To Next Page
Loading...
