40BW-202010
1
-
25
CHAPTER 1 GENERAL INFORMATION
1
4025H/4035H/4035CH TRACTOR
7. Use a liquid sealant removal scraper (flat) to
remove any sealant left on the case. Make sure
not to make any scratch bigger than 0.3 mm
(0.012 in). If the surface is scratched, grind it with
an oil grinder.
6015W117A
Scraper
CAUTION
Do not use kerosene, heavy oil or diesel oil.
to remove any oil and stain left on the surface.
Never use gasoline.
Cut the second step of the nozzle so that it can
drop beads 3 to 3.5 mm wide.
Fit the tube to the tool and use this tool to ap-
ply liquid sealant onto the mating surface.
6015W118A
Liquid seal-
ant
Cut second step
Mating surface
3 - 3.5 mm
CAUTION
Spread liquid sealant. Otherwise, it can leak.
Apply sealant to the inner side of the attached
surface.
Assemble within 15 minutes after applying liq-
uid sealant.
After assembly, tighten the bolts in a diagonal
order.
When oiling the part, run the machine 30 min-
utes after oiling it.
6015W119A
Apply
Tool
3 - 3.5 mm
Liquid sealant
To Next Page
Loading...
Need help?
General
