EasyManuals Logo

Bad Boy 40 Series User Manual

Bad Boy 40 Series
501 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
40BW-202010
1
-
47
CHAPTER 1 GENERAL INFORMATION
1
4025H/4035H/4035CH TRACTOR
8.2.15 CHECKING FUEL LINE
A48W119A
1. Check the fuel line (1) and clamp for leakage.
2. If any abnormal condition is found, replace the
corresponding part with a new one.
CAUTION
If replacing the fuel line, make sure to bleed the
fuel system.
BLEEDING FUEL LINE
Turn the bleeding knob (2) of the fuel filter
counterclockwise.
Turn the ignition switch to crank the engine.

knob.

the engine and tighten the bleeding knob com-
pletely.
If the engine is still hard to be started, loos-
en one to two nozzle holders and crank the en-
gine to bleed the system.
8.2.16 CLEANING AIR CLEANER ELEMENT
1. Open the air cleaner cover (1) and pull out the air
cleaner element.
2. Remove the element (2) and dust it off. If dust is
still attached to the element, insert a nozzle into
it and blow dust out from inside with compressed
air (up to 600 kPa, 6 bar, 90 psi).
3. Replace the part every year or every 6th cleaning
schedulewhichevercomesrst.
A48W120A
A48W121A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bad Boy 40 Series and is the answer not in the manual?

Bad Boy 40 Series Specifications

General IconGeneral
BrandBad Boy
Model40 Series
CategoryTractor
LanguageEnglish

Related product manuals