Need help?Do you have a question about the Bad Boy ZT AVENGER BAZ54KT740 and is the answer not in the manual?
General| Engine Power | 24 HP |
|---|---|
| Cutting Width | 54 inches |
| Cutting Height | 1.5 - 4.5 inches |
| Deck Material | 7-gauge steel |
| Weight | 740 lbs |
Process to validate your mower's warranty by completing the registration form.
Location of mower's model and serial numbers for ordering parts.
Information on obtaining replacement parts and authorized service.
Details on the EPA evaporative emission control system warranty for your equipment.
Essential safety rules and practices for operating the mower safely.
Instructions on adjusting the mower deck height using controls.
Guidelines and precautions for safe mower operation on slopes.
Safety precautions to prevent accidents involving children around the mower.
Safety recommendations and guidelines for towing equipment with the mower.
Essential safety measures for handling gasoline to prevent fire and explosions.
Important safety practices for maintaining the mower in safe working condition.
How to test and ensure the proper function of the mower's safety interlock system.
Guidelines for operating the mower with optional Roll Over Protection Structures (ROPS).
Step-by-step instructions for starting and operating the mower.
Information and recommendations regarding the type of fuel to use.
Instructions on how to properly clean the mower to prevent damage.
Covers ignition switch, choke, and PTO switch operation for starting.
Explains throttle and control levers for speed, steering, and direction.
Details deck height dial and parking brake functions for operation.
Function of the electronic hour meter for tracking run time and RPM.
Warning against towing the mower; use a winch for loading.
How to use neutral bypass rods for moving an inoperable mower.
Importance of sharp blades for cutting quality and engine power.
Safety rules for handling and maintaining mower blades.
Description of standard blades for discharging and bagging.
Description of mulching blades for mulching, discharging, and bagging.
Warning against using aftermarket blades and potential warranty voidance.
Tips on mowing patterns, grass height, and avoiding scalping.
Importance of sharp blades and regular oil changes for performance.
How leaf blade condition indicates mower blade sharpness.
Guidance on bagging versus mulching grass clippings.
Recommended external maintenance checks for the transaxle.
Procedures for transaxle service and use of genuine parts.
Recommended fluids for the hydrostatic system and disposal regulations.
Information on fluid volume and levels for transaxle systems.
Step-by-step guide for changing transaxle oil and filter.
Information on the necessary purge procedure after fluid changes.
How to use neutral bypass rods for moving the mower.
How to adjust pushrods to control transaxle speed.
How to adjust the pump belt tension for proper operation.
Information on using a belt tension gauge for accurate adjustment.
Information about engine oil and recommended type for the mower.
Step-by-step guide for changing engine oil and oil filter.
Step-by-step instructions for replacing the fuel filter.
Instructions for inspecting and replacing the air cleaner element.
Guide to changing spark plugs and checking their gap.
Information on fuses and warning against improper replacement.
Battery voltage requirements and starter solenoid connection importance.
Wiring diagram for the mower's electrical system.
Torque spec for front fork nuts and dust cap reapplication.
Torque spec for rear wheel lugs and re-torquing intervals.
Locations and frequency for greasing belt tensioners and control arm blocks.
Step-by-step guide for removing the cutting deck belt.
Step-by-step guide for installing the cutting deck belt.
How to adjust deck belt spring tension and recommended values.
Information on using a belt tension gauge for accurate adjustment.
Procedure for leveling the deck and setting the correct pitch.
How to loosen and tighten deck hanger bolts for leveling.
How to remove and re-torque blade bolts.
Information about sealed bearings in blade spindles.
Details on what parts are covered and for how long under warranty.
List of items and conditions not covered by the mower warranty.
Steps to follow for obtaining warranty service for your mower.
Limitations and exclusions on express and implied warranties.
Contact information for technical support.
Contact information for warranty inquiries.
Contact information for ordering parts.
To Next Page