Bad Cat Hot Cat - User Manual

Hot Cat Owner's Manual
Bad Cat Amps
Costa Mesa, California
For the latest information go to: www.badcatamps.com. Whilst the information contained
herein is correct at the time of publication, due to our policy of constant improvement and
development, Bad Cat Amps reserves the right to alter specifications without prior notice.

Summary

Important Safety Instructions

General Safety Guidelines

Comprehensive safety precautions for operating and maintaining the amplifier to prevent hazards.

Introduction

Product Features Overview

Front Panel Controls

Channel and Gain Controls

Adjusts gain, volume, and switches channels/gain modes for optimal tone.

Tone Shaping and Master Controls

Controls for Bass, Mid, Treble, Presence, Master Volume, and Reverb for sound shaping.

Input and Switching Functions

Guitar input jack and switches for channel and gain mode selection.

Rear Panel Connections

Power and Switching Components

Power input, switches for power/standby, and HT fuse for amplifier operation.

Effects Loop and Audio Outputs

FX Loop Send/Return and Line Out for external effects and audio signal routing.

Speaker Output Options

Various speaker outputs (impedance options) for connecting external cabinets.

Technical Specifications

Key Amplifier Specifications

Details wattage, tubes, channels, connectivity, dimensions, and weight.

Bad Cat Manufacturer Warranty

Hot Cat Tube Configuration

Bad Cat Hot Cat Specifications

General

Type	Tube Amplifier
Power Output	30 Watts
Channels	2
Reverb	Yes
Effects Loop	Yes
Tubes	3 x 12AX7
Controls	Gain, Volume, Treble, Bass, Master
Speaker	12-inch Celestion