Bad Cat Lynx - User Manual

Lynx Owner's Manual
Bad Cat Amps
Costa Mesa, California
For the latest information go to: www.badcatamps.com. Whilst the information contained
herein is correct at the time of publication, due to our policy of constant improvement and
development, Bad Cat Amps reserves the right to alter specifications without prior notice.

Summary

Important Safety Instructions

Read and Keep Instructions

Follow all instructions and warnings provided for safe operation of the apparatus.

Water and Cleaning Precautions

Avoid using the apparatus near water and clean only with a dry cloth.

Ventilation and Heat

Do not block ventilation openings and avoid installing near heat sources.

Electrical Safety

Protect power cords, unplug during storms, and use grounded outlets for safety.

Introduction

Features

Front Panel Controls

Input and Gain Controls

Input jack and Gain controls for Channel 1 and Channel 2 for adjusting distortion.

Tone Shaping Controls

Bass, Mid, and Treble controls to shape the amplifier's tone.

Channel and Volume Controls

Controls for switching channels and setting volume levels for each channel.

Master and Presence

Global Master Volume and Presence knobs for overall output and brightness.

Noise Gate

Internal noise gate for fast attack and natural decay, adjustable via threshold.

Rear Panel Connections

Power and Switches

Power input, power switch, and standby switch for amp operation.

Fuse and Footswitch

HT Fuse for protection and footswitch jack for channel/mode switching.

Effects Loop

FX Loop Send and Return jacks for integrating external effects pedals or units.

Speaker and Line Outputs

Speaker outputs for cabinets and Line Out for external devices.

Bad Cat Lynx Technical Specifications

Bad Cat Manufacturer Warranty

Lynx Tube Chart

Bad Cat Lynx Specifications

General

Channels	2
Type	Tube
Power	50W
Reverb	Yes
Effects Loop	Yes
Footswitch	Channel Switching