Need help?Do you have a question about the Badger Air-Brush 150 and is the answer not in the manual?
Covers manufacturing defects for one year; PTFE needle bearing has a lifetime warranty.
Details spray patterns for F, M, and L head assemblies based on opening size.
Explains proper motion, common problems, and how to achieve desired spray patterns.
Step-by-step guide for removing and replacing the airbrush tip assembly.
Instructions for safely removing, cleaning, and reinserting the airbrush needle.
How to adjust trigger tension and remove the tube shank assembly.
Diagram and list of available replacement parts for the Model 150 airbrush.
Practice exercise for developing basic airbrush trigger control and motion.
Practice exercise focusing on controlling dot size and placement.
Technique for creating smooth, uniform color coverage using overlapping strokes.
Practice for creating gradual color transitions and gradients.
Methods for using masking, frisket, and stencils for sharp edges and duplication.
Applying airbrushing techniques to create spherical, cubic, and cylindrical forms.
Identifies and explains causes for common airbrush problems like grainy spray or splattering.
Addresses issues such as color spray not shutting off, pulsating spray, and loose parts.
Essential guidelines on material hazards, child supervision, hygiene, ventilation, and respirator use.
General| Type | Dual Action |
|---|---|
| Series | 150 |
| Nozzle Size | 0.5 mm |
| Needle Size | Fine, Medium, Heavy |
| Air Inlet | 1/4" NPT |
| Head Size | Medium |
| Cup Capacity | 1/4 oz (7.4 ml) |
| Fluid Nozzle | Medium |
| Material | Metal |
To Next Page
