Need help?Do you have a question about the Badgy 100 and is the answer not in the manual?
General| Print Technology | Dye sublimation |
|---|---|
| Resolution | 300 dpi |
| Card Feed | Manual |
| Card Capacity | Single card feed |
| Operating System Compatibility | Windows, Mac OS |
| Connectivity | USB |
| Print Speed Color | 38 seconds per card |
| Print Speed Monochrome | 11 seconds per card |
| Card Size | CR-80 (85.6 mm x 54 mm) |
| Card Thickness | 30 mil |
Procedures for unpacking the printer and its accessories.
Details the physical components and operational indicators of the printer.
Guides on connecting the printer to power and USB, and initial setup.
Step-by-step guide on how to insert the printer ribbon.
Instructions for loading cards into the printer's feeder.
Guide on installing the necessary software driver for printer operation.
How to use the Badgy Print Center application to adjust printer settings.
Explains the meaning of different status icons and messages from the printer manager.
Using the included software to design and print custom cards.
Step-by-step instructions for cleaning the printer's internal components.
Procedures for cleaning the sensitive print head component.
Guidance on understanding printer warnings and basic troubleshooting.
Information on printing test cards to diagnose printer issues.
Solutions for common printing issues like non-launch, poor quality, or partial printing.
Steps to remove cards that are stuck within the printer.
Instructions for updating the printer's internal software.
Steps to update the computer's driver software for the printer.
How to contact technical support and what information to provide.
Detailed technical specifications for the Badgy 100 and Badgy 200 printers.
Certifications and compliance statements for radio equipment and safety standards.
To Next Page