EasyManua.ls Logo

Baer Interface Module XC Modbus - Page 8

Baer Interface Module XC Modbus
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 8 from 10
E120103819092
Interface Module XC Modbus
Protocol Converter / User Manual
Baer Energie- & Messtechnik GmbH Siemensstr. 3 D-90766 Fürth Phone +49 911 970590 Fax +49 911 9705950
Technical data:
Housing:
Polycarbonate housing with terminals for using with EMH LZQJ-XC and
DMTZ-XC meters for residential and industrial applications
Degree of protection:
IP20 (according to IEC 60529)
Protection class:
2
Temperature range:
-25°C to +55°C (operational)
-40°C to +80°C (storage temperature)
Relative humanity:
0..95%, non-condensing
Dimensions:
Ca. 50mm x 105mm x 27mm (W x H x D)
Nominal voltage:
Internal power supply from LZQJ-XC or DMTZ-XC meter
Battery:
None
Installation:
Exchangeable during the meter operation
LED displays:
3 LEDs:
(green) Power/Tx: power / transmit data
(yellow) Rx: receive data
(red) Error: internal communication error
Interface:
RS485 (2 wires) according to ANSI/TIA/EIA-485-A-98
Baud rate:
300 to 19200 baud (fixed baud rate)
Data format:
8N1
Data readout:
Internal service data list / table TS: see EMH COMBI-TOOL-Software;
(readout via /4! CR LF);
Note: only the first 125 values will be used
Transmission protocol:
Modbus RTU, Function Code 3
Order number:
#12415
Accessories:
Bus Master / Repeater / Mini-Master
AMR-Software: SIGLON ©
Field Control Center: Meter2SCADA ©