Detailed disassembly steps are as follows:
1.Remove the roof cover according to the
previous description
，
place the roof cover and
fixing bolts in a safe place to prevent damage or
danger.
2. First pull out the shade shafts on both sides
along the direction of arrow A, remove two
locking screw-arrow B-, and finally remove two
front shades (take the right side of the vehicle as
an example).
3. Remove the locking screw-arrow-on both
sides, and then remove the windshield angle
trim-1-. (Take the right side of the vehicle as an
example).
Caution
The tree-shaped clasp on the interior panel is
a disposable part, which needs to be replaced
To Next Page
Loading...