Baileigh BP-3305CNC - User Manual

MAINTENANCE AND PARTS
MANUAL
HYDRAULIC PRESS BRAKE
MODEL: BP-3305CNC
Baileigh Industrial Holdings LLC
P.O. Box 531
Manitowoc, WI 54221-0531
Phone: 920.684.4990
Fax: 920.684.3944
sales@baileigh.com
© 2019 Baileigh Industrial Holdings LLC
REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL
HOLDINGS LLC IS PROHIBITED. Baileigh Industrial Holdings LLC, Inc. does not assume and hereby disclaims any
liability for any damage or loss caused by an omission or error in this Operator’s Manual, resulting from accident,
negligence, or other occurrence.
Rev. 07/2019

Summary

Safety Instructions

Safety Information Recognition

Explains safety alert symbols and signal words for hazard identification.

Personal Safety and Machine Hazards

Covers eye/hearing protection, crush hazards, and avoiding moving objects.

Operational Hazard Warnings

Alerts to hydraulic hose failure, pinch points, high voltage, and emergency stop.

General Safety Rules and Prohibitions

Covers personal responsibility, correct use, avoiding modifications, and basic operating practices.

Specific Operational Prohibitions

Details actions to avoid, like forcing tools, improper dress, and operating under influence.

Technical Support and Contact

Lubrication and Maintenance Procedures

Maintenance Safety Warning

Crucial warning to ensure electrical disconnect is OFF before maintenance.

Routine Maintenance Schedule

Machine Lubrication Guidelines

Hydraulic Oil Management

Hydraulic System Diagrams and Adjustments

Hydraulic System Diagram Overview

Action Loop Table and Speed Adjustment

Electrical System Diagrams and Components

Main Electrical Diagram

Control Circuitry and Wiring

Valve Control and Power Distribution

CNC and Encoder Connections

Light Curtain Safety System

Baileigh BP-3305CNC Specifications

General

Model	BP-3305CNC
Type	Press Brake
Tonnage	330 tons
Back Gauge Stroke	500 mm
Back Gauge Speed	200 mm/s
Bending Speed	10 mm/s