Baileigh R-M10E - User Manual

OPERATOR’S MANUAL
ELECTRIC ROLL BENDER
MODEL: R-M10E
© 2018 Baileigh Industrial, Inc.
REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL, INC.
IS PROHIBITED. Baileigh Industrial, Inc. does not assume and hereby disclaims any liability for any damage or loss
caused by an omission or error in this Operator’s Manual, resulting from accident, negligence, or other occurrence.
Rev. 02/2018
Baileigh Industrial, Inc.
P.O. Box 531
Manitowoc, WI 54221-0531
Phone: 920.684.4990
Fax: 920.684.3944
sales@baileigh.com

Summary

Thank You & Warranty

Introduction

General Notes

Safety Instructions

Emergency Stop Button

Safety Precautions

Technical Specifications

Technical Support

Unpacking and Checking Contents

Cleaning

Instructions for cleaning the machine after unpacking, warning against specific cleaning agents.

Transporting and Lifting

Installation

Securing the Base

Anchoring the Machine

Overall Dimensions

Standard Roller Dimensions

Electrical

Power Cord Connection

Assembly and Set Up

Head Positioning

Instructions on how to pivot the machine head between horizontal and vertical positions for operation.

Material Selection

Understanding Springback

Mounting the Rolls

Procedure for correctly mounting the machine's rolls based on material type and desired bend.

Operation

Start - Up Instructions

Steps for turning on the machine and preparing it for operation, including foot pedal activation.

Operating Instructions

Lubrication and Maintenance

Parts Identification Drawings

Parts Identification List

Electrical Components

Electrical Diagram

Baileigh R-M10E Specifications

General

Brand	Baileigh
Model	R-M10E
Category	Construction Equipment
Language	English