MOTORHOME SERVICE SCHEDULE
In order to validate the factory backed warranty
package, your motorhome must be serviced
by an approved Bailey Service Centre every 12
months (or within 6 weeks of each anniversary
of purchase) in accordance with the NCC
recommended service schedule.
A full listing of the current Approved Bailey
Centres can be found on the Retailer Network
pages of our website @ www.bailey-caravans.
co.uk.
WARNING: In no circumstances should the
bodyshell xings be tampered with or adjusted
by the motorhome owner. In instances
where this has occurred the warranty will be
automatically invalidated.
STANDARD MOISTURE SURVEY FOR ALU-
TECH CONSTRUCTION MOTORHOMES
The following moisture survey must be carried
out using a calibrated moisture meter every 12
months by an Approved Bailey Service Centre.
Readings should be taken on the oor section
of the motorhome in positions where the holes
created by the meter’s probes are not visible
e.g. behind seals, in bed boxes or in cupboard
bases. It is important to make sure that the
probes are free of moisture and the surface of
the oor is free from condensation.
Readings below 20% are considered
acceptable. Readings greater than 20% will
identify areas that need further investigation
and possible remedial work.
All other parts of the body of the Alu-Tech
motorhome should be checked visually for
moisture ingress.
THERMAL INSULATION GRADE
All Bailey Alu-Tech Motorhomes are
manufactured and approved by the NCC to
EN1646-1 thermal insulation and heating
classication Grade 3. This has been approved
using the motorhome space heater using both
the heating and gas as the heating method.
Grade 3 is classied as being able to achieve
an average temperature difference of 35 °C
between inside the motorhome and outside
when the exterior temperature is -15°C.
To Next Page
Loading...
