Bailey Pursuit - Side Dinette Bunk Assembly

141
%('0$.(83
41. SIDE DINETTE TOP BUNK
ASSEMBLY
Step 1 Remove cushions and
draw the curtains and close the
blind if fitted.
Step 2 Holding the bunk in both
hands pull it inwards
Step 3 whilst lifting upwards
Step 4 The bunk mechanism will
automatically lock in the up
position.
Step 5 Release retaining strap on
the underside of the bunk base.
The second half of the bunk base
can now be unfolded towards the
caravan wall.
Step 6 Turn the turnbuckle
catches located on the metal bunk
legs to ensure that the bunk
cannot be folded by pushing up
from below.
Step 7 The safety rails and ladder can now be slotted into position.
Step 8 Check the security of the bunk and replace the cushions before allowing a person
to use the bunk.
6WHS5HPRYHWKHFXVKLRQVGUDZWKHFXUWDLQV
DQGFORVHWKHEOLQGLIoWWHG
Step 1 Remove cushions and
draw the curtains and close the
blind if fitted.
Step 2 Holding the bunk in both
hands pull it inwards
Step 3 whilst lifting upwards
Step 4 The bunk mechanism will
automatically lock in the up
position.
Step 5 Release retaining strap on
the underside of the bunk base.
The second half of the bunk base
can now be unfolded towards the
caravan wall.
Step 6 Turn the turnbuckle
catches located on the metal bunk
legs to ensure that the bunk
cannot be folded by pushing up
from below.
Step 7 The safety rails and ladder can now be slotted into position.
Step 8 Check the security of the bunk and replace the cushions before allowing a person
to use the bunk.
6WHS +ROGLQJ WKHEXQN LQ ERWK KDQGVSXOO
LWLQZDUGV
Step 1 Remove cushions and
draw the curtains and close the
blind if fitted.
Step 2 Holding the bunk in both
hands pull it inwards
Step 3 whilst lifting upwards
Step 4 The bunk mechanism will
automatically lock in the up
position.
Step 5 Release retaining strap on
the underside of the bunk base.
The second half of the bunk base
can now be unfolded towards the
caravan wall.
Step 6 Turn the turnbuckle
catches located on the metal bunk
legs to ensure that the bunk
cannot be folded by pushing up
from below.
Step 7 The safety rails and ladder can now be slotted into position.
Step 8 Check the security of the bunk and replace the cushions before allowing a person
to use the bunk.
6WHS  :KLOH OLIWLQJ XSZDUGV
Step 1 Remove cushions and
draw the curtains and close the
blind if fitted.
Step 2 Holding the bunk in both
hands pull it inwards
Step 3 whilst lifting upwards
Step 4 The bunk mechanism will
automatically lock in the up
position.
Step 5 Release retaining strap on
the underside of the bunk base.
The second half of the bunk base
can now be unfolded towards the
caravan wall.
Step 6 Turn the turnbuckle
catches located on the metal bunk
legs to ensure that the bunk
cannot be folded by pushing up
from below.
Step 7 The safety rails and ladder can now be slotted into position.
Step 8 Check the security of the bunk and replace the cushions before allowing a person
to use the bunk.
6WHS7KHEXQNPHFKDQLVPZLOODXWRPDWLFDOO\
ORFNLQWKHXSSRVLWLRQ
Step 1 Remove cushions and
draw the curtains and close the
blind if fitted.
Step 2 Holding the bunk in both
hands pull it inwards
Step 3 whilst lifting upwards
Step 4 The bunk mechanism will
automatically lock in the up
position.
Step 5 Release retaining strap on
the underside of the bunk base.
The second half of the bunk base
can now be unfolded towards the
caravan wall.
Step 6 Turn the turnbuckle
catches located on the metal bunk
legs to ensure that the bunk
cannot be folded by pushing up
from below.
Step 7 The safety rails and ladder can now be slotted into position.
Step 8 Check the security of the bunk and replace the cushions before allowing a person
to use the bunk.
6WHS  5HOHDVH UHWDLQLQJ VWUDS RQ WKH
XQGHUVLGHRIWKHEXQNEDVH7KHVHFRQGKDOI
RIWKHEXQNEDVHFDQQRZEHXQIROGHGWRZDUGV
WKHFDUDYDQZDOO
Step 1 Remove cushions and
draw the curtains and close the
blind if fitted.
Step 2 Holding the bunk in both
hands pull it inwards
Step 3 whilst lifting upwards
Step 4 The bunk mechanism will
automatically lock in the up
position.
Step 5 Release retaining strap on
the underside of the bunk base.
The second half of the bunk base
can now be unfolded towards the
caravan wall.
Step 6 Turn the turnbuckle
catches located on the metal bunk
legs to ensure that the bunk
cannot be folded by pushing up
from below.
Step 7 The safety rails and ladder can now be slotted into position.
Step 8 Check the security of the bunk and replace the cushions before allowing a person
to use the bunk.
6WHS  7XUQWKH WXUQEXFNOHFDWFKHV ORFDWHG
RQWKHPHWDOEXQNOHJVWRHQVXUHWKDWWKHEXQN
FDQQRWEHIROGHGE\SXVKLQJXSIURPEHORZ
6WHS7KHVDIHW\UDLOVDQGODGGHUFDQQRZEH
VORWWHGLQWRSRVLWLRQ
6WHS  &KHFN WKH VHFXULW\ RI WKH EXQN DQG
UHSODFHWKHFXVKLRQVEHIRUHDOORZLQJDSHUVRQ
WRXVHWKHEXQN