Baja Designs S2 Pro - User Manual

Baja Designs S2 Pro LED Light - Wide Cornering Beam
Installation Guide for Jeep Wrangler '07-'18 4-Door JKU
Installation Time: <1 Hour
Tools Required:
 Allen Wrench
 Wiring Harness
Installation Instructions:
1. Remove the light and hardware from packaging and locate the mount. Thread the bolt and washer through
before attaching the mount to the light (Figure A).
Figure A
2. Slide a split-washer onto both side bolts before using to attach mount to light (Figure B).

Summary

Tools Required

Installation Steps

Mount the LED Light Fixture

Steps 1-6 detail physically attaching and securing the LED light fixture using provided hardware and bolts.

Connect the Wiring Harness

Steps 7-8 cover connecting the supplied quick connect to a wiring harness and then connecting the light.

Baja Designs S2 Pro Specifications

General

Brand	Baja Designs
Model	S2 Pro
Category	Automobile Accessories
Language	English