Need help?Do you have a question about the Baja Outlaw 20 and is the answer not in the manual?
Details contents of the owner's manual packet, including the owner's manual and OEM information.
Explains the manual's purpose and content.
Outlines owner responsibilities and lists resources for boating information.
Outlines dealer duties and the warranty coverage process.
Explains the importance and location of the HIN for identification and correspondence.
Details Baja's compliance with safety standards and industry certifications.
Guides owners on obtaining service, parts, and repair for their boat.
Explains the meaning of different safety labels (Danger, Warning, Caution, Notice) found on the boat.
Lists required safety equipment and details the fire extinguishing system.
Addresses CO dangers, symptoms, and prevention methods.
Details the function and importance of the onboard carbon monoxide monitor.
Details PFD classifications, requirements, and safety recommendations for lifesaving gear.
Lists recommended gear for safe boating and warns against operating under the influence.
Covers boat capacity limits and power considerations.
Provides advice on propeller selection and usage to avoid engine damage.
Discusses boat stability factors and the importance of maintaining operator control.
Provides guidance on weather awareness, boat design categories, and safe navigation planning.
Covers safety precautions for swimming and water skiing, including PFD use and signals.
Details safety practices related to diving flags and operating near divers.
Provides procedures for handling medical emergencies, water rescues, fires, and boat flooding or capsizing.
Outlines actions for collisions, leaks, grounding, and propulsion system failures.
Lists important contact numbers for safety information and assistance.
Lists international standards and discusses environmental impact and spillage regulations.
Covers regulations on waste disposal and expectations for operating quietly.
Warns about the dangers of boat wakes and responsible operation.
Provides definitions for common nautical terms used in boating.
Explains the meaning of various symbols found on controls, gauges, and in the manual.
Illustrates the placement of various warning and danger labels on the boat.
Provides instructions and cautions for docking, lifting, and trailering the boat.
Advises on safe passenger placement and behavior during boat operation.
Lists the boat's physical dimensions and clearance specifications in SAE units.
Lists the boat's physical dimensions and clearance specifications in metric units.
Explains the stern drive propulsion system and guidelines for propeller selection.
Illustrates the layout of key components and features on the boat's deck.
Describes major boat controls like shift/throttle, trim, and important gauges.
Explains the function of the trailer switch and trim tabs for boat adjustment.
Covers the ignition shutdown switch and the boat's engine alarm system.
Details critical engine gauges like tachometer and hour meter for monitoring performance.
Details engine gauges and the operation of navigation and anchor lights.
Provides a comprehensive checklist for preparing, launching, and securing the boat.
Offers guidance on trailer safety and the correct procedures for fueling the boat.
Details safe boarding practices and warnings about wet decks.
Details the importance, types, and proper use of Personal Flotation Devices (PFDs).
Covers instructing passengers and the steps for safely starting the boat's engine.
Explains how to shift gears for propulsion and procedures for stopping the engine.
Describes the hydraulic steering system, its components, and maintenance.
Details the power steering system, its inspection, and fluid level checks.
Covers bilge area inspection, fuel/oil spillage, drain plugs, and bilge pump operation.
Explains the function of the bilge blowers and their importance for safety.
Explains engine/stern drive maintenance and common causes of vibration.
Covers stern drive damage from impact and procedures for propeller removal and installation.
Describes the components of the boat's gasoline fuel system and safety precautions.
Provides detailed precautions for fueling and managing static electricity.
Lists essential checks to perform before and during the fueling process.
Lists essential checks to perform after completing the fueling process.
Explains the DC electrical system, battery types, and battery maintenance.
Covers fuse/breaker usage, fuse panel location, and protection against electrolytic corrosion.
Details the location and replacement of fuses in the fuse panel.
Details the Mercathode® system for protecting underwater metals from corrosion.
Presents wiring diagrams for the drive pump system.
Shows wiring diagrams for the drive pump system with K-Plane trim tabs.
Illustrates the wiring and function of the ignition switch and associated safety features.
Provides a comprehensive DC wiring diagram for the boat's electrical systems.
Details the wiring connections for the boat's switch panel.
Lists the locations of standard and optional equipment installed on the boat.
Explains the automatic fire extinguisher system and the fire extinguisher discharge port.
Covers canvas options, care, and maintenance, plus information on the boat horn.
Details safety rules for using the optional swim platform and ladder.
Describes the optional depth finder and the standard stereo system.
Explains the different exhaust system options available for the boat.
Provides a comprehensive chart detailing inspection and maintenance schedules for boat systems.
A form to record owner, boat, engine, and dealer details for service reference.
Outlines protocols for inspecting and servicing the bilge, engine, and fuel system.
Covers wiring checks, fittings, topside equipment review, and winterization procedures.
Details steps for preparing the boat after a period of storage.
Advises on measures to ensure the security of the boat and its contents.
Provides guidelines for maintaining the power steering system.
A checklist for ensuring the boat is ready and safe before boarding.
A checklist for preparing the boat and passengers before departing.
Checklists for safely departing and returning the boat to port.
Covers procedures for securing the boat and troubleshooting engine start problems.
A checklist for verifying the seaworthiness and condition of added equipment.
A logbook for recording all maintenance performed on the boat.
Guides on cleaning agents, fiberglass care, and removing stains and scratches.
Covers boat maintenance when moored, cleaning topside fittings, and acrylic plastic care.
Provides instructions for cleaning and storing canvas and clear vinyl.
Details cleaning and maintenance procedures for interior and exterior upholstery fabrics.
To Next Page
General
