To Next PageTo Next Page
Need help?Do you have a question about the Baja sportub series and is the answer not in the manual?
Instructions for installing an optional ozone generator for the spa, connecting it to the equipment pack.
Details for connecting the spa to a 120-volt power supply, including circuit breaker requirements.
Instructions for permanently connecting the equipment module to a 240-volt service, including wiring.
Overview of the main spa control and power unit, including GFCI and ON/OFF switch.
Description of the user interface for controlling spa functions like jets, light, and temperature.
How to use the Jets key to control pump speed and operation cycles.
Instructions for operating the spa's internal light, including auto-shutoff.
Guide to setting the frequency and timing of spa filtration cycles for water maintenance.
How to set the length of time the spa's filter cycles will run.
Using the up/down keys to set and adjust the desired spa water temperature.
Explanation of how the heater activates and deactivates to maintain set temperature.
Details on the automatic system to prevent freezing during cold conditions.
Information on the system's response to excessively high water temperatures.
The system's standard operating settings after power application or loss.
How to change the temperature display between Fahrenheit and Celsius.
Setting the duration for spa filtration cycles (60, 120, 180, or 480 minutes).
Configuring the spa to filter 1, 2, or 3 times daily for water sanitation.
Controlling the primary pump speed (low, high) and pump shutoff.
Operating the secondary booster pump and its automatic shutoff feature.
Turning the spa's interior light on and off, with automatic 2-hour shutoff.
Adjusting the spa's water temperature using the dedicated program button.
Visual guide showing electrical connections for the 1057-58 model.
How to adjust air controls and direct water flow for different jet settings.
Procedure for removing and cleaning the spa's filter cartridge.
Instructions for installing the spa's cabinet drain valve for water removal.
Detailed steps for removing, cleaning, and reinstalling the spa filter cartridge.
Recommendations for maintaining the spa's wooden cabinet finish with stain.
Steps for completely draining the spa for cleaning or storage.
Diagnosing and resolving issues with spa equipment like pumps, jets, lights, and ozonator.
Troubleshooting common problems related to water circulation, flow rates, and airlocks.
Steps to resolve problems with the spa's heating system, including no heat, low heat, and high heat.
Identifying and fixing common sources of water leaks in the spa system.
Troubleshooting intermittent or repeated GFCI tripping and electrical safety concerns.
Understanding the control panel display for freeze protection mode.
Interpreting the 3-dot alarm related to the water pressure switch.
Diagnosing the 3-dot alarm indicating high water temperature protection activation.
Identifying issues indicated by the 3-dot alarm related to the temperature sensor.
Troubleshooting steps for errors when the system error LED is off.
Diagnosing errors indicated by an illuminated system error LED on the circuit board.
Resolving issues with temperature readings falling within the 30-39°F range.
General