BAK Thermoplastic Welding Technology AG 1
OPERATING INSTRUCTIONS
Automatic welding machine LARON Version 2.1
Please read the operating instructions carefully before use and keep for further reference!
Before start-up these operating instructions must be examined carefully because we will not
assume any liability for any failures resulting from improper use.
APPLICATION
The Laron is an automatic welding machine for overlap welding of roofing membranes made
of PE, PVC, TPO, ECB, EPDM, CSPE and bitumen. The machine can also be used in areas
close to edges and on uneven surfaces.
TECHNICAL DATA
Voltage VAC 230 400
Frequency Hz 50/60 50/60
Power consumption W 4100 6000
Power regular operation W 2500 4200
Drive m/min. 0.5-7 stepless 0.5-7 stepless
Welding temperature °C 30-620 stepless 30-620 stepless
Air flow % 60-100 60-100
Size LxWxH mm 610x410x320 610x410x320
Weight kg 39 39
To Next Page
Need help?
General
