Balanced Audio Technology VK-300x Special Edition User Manual

1
VK-300xSE
WARRANTY REGISTRATION FORM
Unit Serial Number: _______________________________________
Customer Name: _______________________________________
Address: _______________________________________
_______________________________________
Date of Purchase: _______________________________________
Purchased From:
Dealer Name: _______________________________________
Address: _______________________________________
_______________________________________
IMPORTANT NOTE:
In order to receive the full five year product warranty, please mail this
completed form together with a copy of your sales receipt to Balanced Audio
Technology at the address below, within thirty days of purchase.
Failure to do so will result in the product being warrantied for one year
from the date of manufacture.
1300 First State Blvd. Suite A Wilmington, DE 19804
Tel: 302-999-8855 Fax: 302-999-8818

Balanced Audio Technology VK-300x Special Edition Specifications

General

Input Impedance	100 kOhms
Power Output	150 watts per channel
Frequency Response	10 Hz - 100 kHz
Total Harmonic Distortion	< 0.1%
Tube Complement	6H30
Signal-to-Noise Ratio	> 100 dB

Summary

Introduction

Warnings

Safety precautions to prevent serious injury, electrical shock, or fire during operation.

VK-300X Front Panel Controls

STANDBY Button and LED

VK-300X Power-On Sequence

Turning the VK-300X Off

PHASE Button and LED

MONO Button and LED

MUTE Button and LED

INPUT Selection Buttons

VOLUME Knob

FUNCTION Button

MUTE Function

VK-300X Programmable Functions

BALANCE Adjustment

Allows adjustment of the audio balance between left and right channels for each input.

RELATIVE Volume Adjustment

Enables setting volume offsets between different inputs to match output levels.

PHASE Programming

Configures the signal phase (Inverting, Non-Inverting, or Last) for individual inputs.

MONO/STEREO Programming

Sets the audio mode (Stereo, Mono, or Last) for each input source.

MAXIMUM Gain Programming

Limits the maximum allowable volume setting for specific inputs as a safety feature.

FIXED Gain Mode

Allows setting a fixed gain level for an input, independent of the volume knob.

DISPLAY MODE Programming

Selects the display mode for volume indication (Counts, DBU, or DBM).

INPUT NAME Programming

Allows users to assign custom four-character names to each audio input.

Remote Control Functions

Volume Up and Down

Mute

Fade

INPUT SELECT

DISPLAY/POWER Switch

Fuse Protection

Five Year Limited Warranty

Limited Warranty

Outlines the five-year warranty period for manufacturing, material, and workmanship defects.