Do you have a question about the Balanced Audio Technology VK-5i and is the answer not in the manual?
Type | Preamplifier |
---|---|
Number of Channels | 2 |
Input Impedance | 100 kOhms |
Signal-to-Noise Ratio | > 90 dB |
Gain | 18dB |
Frequency Response | 10 Hz - 100 kHz |
Total Harmonic Distortion (THD) | < 0.1% |
Power Consumption | 200 watts |
Outputs | 2x RCA Main Out, 1x RCA Tape Out |
Crucial safety warnings to prevent injury, shock, or fire during operation.
Details on connecting balanced and single-ended audio components to the VK-5i preamplifier.
Describes the power-on sequence, volume display, and mute function during startup.
Describes the two-digit display for volume settings and gain changes.
Explains manual and automatic mute modes and how the red LED indicates mute status.
Explains the variable speed volume control buttons on the remote.
Step-by-step guide to saving a desired volume level to a preset button.
Instructions on how to select and activate a stored volume preset.
States the basic five-year warranty period and conditions for its validity.