Introduction
Thank you for your purchase of the Balanced Audio Technology VK-P10 balanced phono
stage. Please read this owner's manual to obtain the full benefit of the VK-P10 in your system. It
will provide you with the needed safety information and operating procedures for this exceptional
unit.
WARNINGS
:
To prevent the possibility of serious injury, electrical shock or fire:
DO NOT operate with the cover removed.
DO NOT expose to rain or moisture.
DO NOT defeat the ground power-plug.
DO NOT replace fuse with anything other than the same type and rating as supplied by the factory.
Package Contents
Included in the box should be the following:
Description Quantity
VK-P10 Balanced phono stage 1
Power Cord 1
Male Connector Pins 10
Spare Fuse (See Fuse Protection) 1
XLR Input Shorting Plugs 2
Torx Wrench (T-10) 1
Spare Top Cover Screws 5
User’s Manual 1
Optional Accessories (as ordered)
Save all the packaging material in a safe dry area for the unlikely event that you need
to return the VK-P10 to the factory for service.
To Next Page
Loading...
