en
10
Controls
Fig. !
Switching
the appliance on
Fig. !
Switch on the appliance with the On/Off
button 1.
The temperature display 3 flashes until
the appliance has reached the set
temperature.
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: –18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■ The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Setting the temperature
Turn temperature controller, Fig. !/5, to
the required setting.
When the controller is at a medium
setting, the temperature drops
to approx. +4 °C in the coldest zone.
Fig. !/5
Higher settings lower the temperature in
the refrigerator compartment.
We recommend:
■ Perishable food should not be stored
above +4 °C.
■ Low setting for short-term
storage of food (energy-saving mode).
1 On/Off button
Serves to switch the whole
appliance on and off.
2 Selection button for freezer
compartment
The freezer compartment
temperature can be selected
from –24 °C to –16 °C.
The set temperature
is indicated on display 3.
3 Temperature display freezer
compartment
The numbers next
to the temperature display lights
correspond to freezer
compartment temperatures in °C.
The lit lamp indicates
the selected temperature.
4 “Super” button (freezer
compartment)
Switches super freezing
on and off.
To Next Page
Loading...