Technical data en
35
J Technical data
Technical data
Dimensions:
85 x 60 x 60 cm
Height x width x depth
Weight:
Approx. 48 kg
Maximum load:
8 kg
Condensate container:
4,8 l
Connected voltage:
220 - 240 V
Connected load:
Max. 600 W
Fuse:
10 A
Drum interior light
*
Ambient temperature:
5 - 35 °C
Power consumption when
switched off:
0,10 W
Power consumption when
ready for use (left-on mode):
0,50 W
This product contains light sources from
energy efficiency class F. These light
sources are available as a spare part
and must only be replaced by trained
specialist staff.
J After-sales service
Aft er- sales service
After-sales service
If you cannot rectify the fault yourself
(faults, what to do?), please contact our
after-sales service. We will always find
an appropriate solution to avoid
unnecessary visits by engineers.
The contact information for your nearest
after-sales service can be found here or
in the enclosed after-sales service
directory.
Please provide after-sales service with
the dryer's product number (E-no.) and
production number (FD).
You can find this information on the
inside of the dryer door or on the rear of
the dryer.
Trust the expertise of the
manufacturer.
Contact us. You can therefore be sure
that the repair is carried out by trained
service technicians who carry original
spare parts.
* Depending on the model
(1U )'
To Next Page
Loading...
