54464_02-97_A
G
R
B
W
J6
J3
J2
W12
K1
F10A 250V
F5
X-B
Used for a Blower output ONLY
when Pump 2 at J5 (7-B) is a 2-speed pump.
• W15 (9-A) connected to J98 (8-B)
X-P
Used for a 1-speed Pump 3 output
when Pump 2 at J5 (7-B) is a 1-speed pump
and a blower is connected to J3 (8-B).
• W15 (9-A) connected to J97 (9-B)
Also used for a 1-speed Pump 4 when
Pump 3 replaces a Blower on J3 (9-B)
X-P632
Used for a 2-speed Pump output or for two 1-speed
Pumps. Can also be used for other optional setups.
• J6 on X-P632 connects directly to Black AC (1-C) on
the main EL2000 PCBA.
PN 53680
PN 53681
X-P231
Can replace the X-P in cases where branch circuit
protection is needed for high amperage devices that
would over-burden power input fuse F7 (1-B) on the
main PCBA. This allows J6 on the X-P231 to connect
directly to Black AC (1-C) on the main EL2000 PCBA.
X-O3 PN 53426
X-FOW Kit
Special setup with X-03 and Adapter PN 25338 to
operate a fiber-optic light and color wheel independently.
Required to operate a Fiber Optic when a Circ Pump is installed
M i PCBA t J2
Document PN 40483 K
PN 53912
G
R
B
W
G
R
B
W
J6
J7
J4
J5
J2
W12
K1
G
R
B
W
J6
J4
J2
W12
K1
Adapter PN 25338
To J5 on X-O3
To Spa Light on
EL2000
(120V Setup)
PN 53310
PN 53544
G
R
B
W
J1
W1
J7
J6
F30A 480V
X-P231
PN 53681
P/N 22909 REV B
G
R
B
W
J1
W1
J2
J6
F30A 480V
X-P632
PN 53680
P/N 22909 REV B
Expander Options
To Next Page
Loading...
