Balboa Instruments VS Series

Need help?

Do you have a question about the Balboa Instruments VS Series and is the answer not in the manual?

Summary

Base Panels

VL600 S Panel

Panel PN 54547-01. Connects to Main Board terminal J1 only.

VL701 S Panel

Panel PN 51057-01 (Serial Standard). Connects to Main Board terminal J1 only.

Basic System Features and Functions

Power Requirements

Specifies electrical service requirements and wiring for the system.

System Outputs

Details the standard and optional system outputs like pumps, blower, and heater.

Additional Options

Lists optional system enhancements such as remotes and lighting.

Persistent Memory Reset Procedure

Instructions for resetting persistent memory after DIP switch changes.

Persistent Memory and Time of Day

Explains how persistent memory stores settings and Time of Day behavior.

Power Up Display Sequence

Describes the sequence of information displayed upon system power up.

Wiring Configuration and DIP Settings

Switchbank A Configuration

Details DIP switch settings (SSID, A1-A10) and their functions for system configuration.

Panel Button Assignments

Maps panel buttons to system functions based on DIP switch settings.

DIP Switches and Jumpers Definitions

DIP Switch Key and Functions

Defines the purpose and settings for each DIP switch (A1-A10).

Jumper Settings

Explains the factory settings and function of jumpers J12 and J43.

Aux Panel Information

Details compatibility and button mapping for auxiliary panels (VX20, VX40S).

Ozone Connections

Ozone Connector Voltage Configuration

How to set the voltage (120V/240V) for the ozone connector and its impact.

Balboa Ozone Generator Connection

Wiring instructions for 120V and 240V Balboa ozone generators.

Serial Standard Panel Configurations

VL600 S Serial Standard Panel

Overview and connection details for the VL600S serial standard panel.

VL701 S Serial Standard Panel

Overview and connection details for the VL701S serial standard panel.