2
Introduction:
The bba™ is a four channel, 120 Watts RMS Bluetooth wireless audio amplifier,
capable of delivering up to 30W RMS per channel. It has a compact, water
resistant design that allows for flexible mounting possibilities. It is integrated into
the BP systems and can be controlled via your smart device or a TP800 / TP900 /
spaTouch™ panel.
The unit accepts either audio streamed via Bluetooth connection or hard wired
input via RCA input.
Uses:
To add up to four loudspeakers or two pop-up speakers and a subwoofer
to a portable spa
As a stand-alone system amplifier for any audio source (Mp3 player or
standard audio system)
Features:
Powers up to (8) 4ohm speakers
Internal distortion limiting circuits
Rear channels switchable from full range to powered sub out.
Water resistant design
To Next Page
Loading...