3
INSTALLATION INSTRUCTIONS
Mounting the Amplifier:
1) Choose a mounting location that is well ventilated. The Amplifier
generates significant heat when operating at high power levels.
2) It is preferable to mount the unit such that the ventilation fins are vertical
or facing upward.
3) Drill 1/8” (or 3mm) pilot holes in the mounting surface corresponding to the
4 mounting flanges of the amplifier. Be sure not to drill into any critical
areas of your spa.
4) Fasten the amplifier to the surface securely using the 4 included tapping
screws.
To Next Page
Loading...