44 Owner’s Manual Baldertech Balder
|
Baldertech
9. TROUBLESHOOTING
What do you do when
dead?
•
•
•
• Remove the charge con-
• Check that the on/off
• Check that the magnetic
• Check that the switch-
es for disconnecting the
but none of the electrical
• •
3
•
• Poor contact in the charge
•
•
•
• Make sure that the indica-
• If the indicator on the
charger is not on, there is a
•
•
•
seconds, then switch it on
•
•
•
height until it is below the
•
•
•
•
• Count the number of
7
• -
• -
•
•
8
suddenly halved while it
•
•
• Check the seat height as
Electric back function
and electric tilt move
•
•
• Raise the seat so that the
limiter switches are not
•
•
•
• Incorrect assembly
• -
•
•
• If you are not sure what is
wrong or how you should
Lift, tilt or back function
moves in one direction
only
•
•
•
• Check whether there are
any foreign bodies in the
•
To Next Page
Loading...
