Baldor DG3E - Replacement Parts

A-2 Premier K Series MN2414
Replacement Parts
Replacement parts assembly views for the Generator set are shown in Figure A-3 and A-4.
Parts information is provided in Table A-1. Parts information for the engine is provided in the
engine manual that was provided with your generator set. Please refer to the engine manual for
replacement parts information.
Figure A-3 Alternator Assembly
1
2
3
4
5
6
7
OFF
ON
10 11 12
13
14
15
Figure A-4 Frame Assembly
20
21
22
23
21
RM1088A15 (.31−18x0.56)
RM1088A36 (.31−18x0.75)
HB7025A00
HB7025A02
OR
HB7025A06
HB7025A07
Table A-1 Generator Set Parts List
Ref No. Part No. Description DG3E DG6E
1 HA9139A01 Adaptor X X
1 HB6178A00 Adaptor
2 HA1037A00 C" Washer X X
3 61FN3000 Fan X X
4 61RA0017A00 Rotor Assembly (includes bearing) X
4 61RA0015A00 Rotor Assembly (includes bearing) X
4 61RA0015A02 Rotor Assembly (includes bearing)
5 61SA0016A07 Stator Assembly X
5 61SA0021A04 Stator Assembly X
5 61SA0016A00 Stator Assembly
6 61EP3204A01 Bearing Bracket (bearing included with rotor) X X
7 EH0321A00 Cover X
7 EH0322A00 Cover X
10 WD1541A33 GFCI Duplex Receptacle, 250VAC at 20 Amps, NEMA 5−20R X X
11 WD1541A10 Receptacle, 125VAC at 30 Amps, NEMA L5−30R X X
12 WD1541A14 Receptacle, 125/250VAC at 30 Amps, NEMA L14−30R X
12 WD1541A15 Receptacle, 125/250VAC at 20 Amps, NEMA L14−20R X