EasyManua.ls Logo

BALDR HCS528ARF - Pool Thermometer; Troubleshooting

BALDR HCS528ARF
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. TROUBLESHOOTING
EN
Problem Possible Solution
Pool thermometer
signal is disconnect-
ed or showing
dashes (- -) on the
receiver.
1. Please remove and reinse the pool
thermometer batteries. If it still
disconnected please replace with
new batteries and t again.
2. The maximum transmission range is
328ft/100m, move the receiver
closer to the pool thermometer.
3. Make sure the receiver is placed at
least 3ft/0.9m away from electronics
that may inteere with the wireless
communication, such as computers,
TVs, microwaves, other wireless
transmitters or other receivers, etc.
3.2 POOL THERMOMETER
- 05 -
When Batte Indicator shows on
the pool thermometer replace
batteries.