Baldwin Boxall Vigil 3 - Page 7

Vigil 3 Amplifier
Installation Instructions
Vigil 3 Amplifier Installation Manual issue 1 1
1 Introduction
1.1 V IGIL 3 A MPLIFIER D ESCRIPTION
The Vigil 3 Amplifier range consists of modules containing 2 or 4
amplifier blocks.
The following Vigil 3 amplifier modules are available;
• BV75D - 2 x 75W Amplifier Blocks
• BV150D -2 x 150W Amplifier Blocks
• BV300D - 2 x 300W Amplifier Blocks
• BV75Q - 4 x 75W Amplifier Blocks
• BV150Q - 4 x 150W Amplifier Blocks
Vigil 3 Amplifiers contain a built in mains PSU and when
combined with a BVMBC Battery Charger Module form a
complete EN54-4 compliant Battery Backed power supply
system.
The audio input for each amplifier is presented on two separate
RJ45 connectors.
Each amplifiers output is presented on a single 2-way plug/cage
clamp termination connectors providing 100V output.