EasyManua.ls Logo

Baldwin Pianovelle RP2 - User Manual

Default Icon
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Introduction
Thanks for purchasing a Baldwin Pianovelle, a high quality product that employs the most advanced technology available to
produce real piano sounds.
Although Pianovelle is very easy to use, you are recommended to consult this manual whenever you are not sure what to do. Of
utmost importance is, of course, how you treat your Pianovelle. Do not forget, therefore, to read the General Safety Instructions
below to guarantee a long and trouble free use of your instrument.
General safety instructions
Power source
• Be sure that your local AC mains voltage matches the voltage specified on the name plate before connecting to the mains.
• DC power cannot be used to power this instrument.
Handling the power cord
• Never touch the power cord or its plug with wet hands.
• Never pull on the cord to remove it from the wall socket, always pull the plug.
• Never forcibly bend the power cord.
• If the power cord is scarred, cut or broken, or has a bad contact, it will be a potential fire hazard or source of serious
electric shock. NEVER use a damaged power cord; have it replaced by a qualified technician.
If water gets into the instrument
• Remove the power cord from the wall socket at once, and contact the store where the unit was purchased.
• The top surface of your instrument should never be used as a shelf for flower vases and other containers which hold
liquids.
Metal items etc. inside the unit
• Do not permit metal items or other materials to fall inside the unit.
Metal items may result in electric shock or damage.
• Be especially careful with regards to this point when children are near the unit. They should be warned never to try to put
anything inside, and never to slide a hand into the unit while you or other persons are playing.
• If articles do fall inside, remove the power cord from the wall socket at once and, if necessary, contact the store where the
unit was purchased.
• As a general precaution, never open the unit and touch or tamper with the internal circuitry.
If the instrument plays in an abnormal way
• Turn off the power immediately, remove the power cord from the mains outlet and contact the store where it was pur-
chased.
• Discontinue using the unit at once. Failure to do so may result in additional damage or other unexpected damage or
accident.
General user maintenance
• Clean the cabinet and keys of your RP1/RP2/GRP3 using a soft, clean, slightly damp cloth and polish with a soft, dry
cloth.
• Never use industrial cleaners, detergents, abrasive cleansers, waxes, solvents or polishes as they may damage the instru-
ment finish.
• Always turn off the power supply after use and never turn the unit on and off repeatedly in quick succession as this places
an undue load on the electronic components.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Baldwin Pianovelle RP2 and is the answer not in the manual?

Summary

Introduction

General Safety Instructions

Essential guidelines for safe operation and maintenance of the instrument.

Instrument Overview

RP1 Control Panel

Diagram and description of the RP1 model's control panel features.

RP2;GRP3 Control Panel

Diagram and description of the RP2/GRP3 model's control panel features.

Getting Started

Powering On and Initial Setup

Initial steps for powering on the Pianovelle and basic setup.

Selecting and Playing Sounds

How to choose and play the instrument's preset sounds.

Play Modes

Layer Mode

Combining two sounds simultaneously for a richer tone.

Split Mode

Dividing the keyboard to play two different sounds.

Activate Split Mode

Steps to enable the Split mode on the keyboard.

Reverb & DSP Effects

Select Reverb;DSP Effect Type

Choosing different types of Reverb and DSP effects.

Transpose Function

Sequencer Operation

Sequencer RP1 Overview

Details on the RP1's single-track recording capabilities.

How to Record a Song (RP1)

Step-by-step guide to recording songs on the RP1.

Sequencer RP2;GRP3 Overview

Information on the RP2/GRP3's two-track sequencer.

RP2;GRP3 Sequencer Functions

Explanation of specific functions like Play, Pause, Record, Erase.

Master Set Function

Master Set Menu for RP1

Accessing and configuring RP1 settings via sound selectors.

Master Set Menu for RP2;GRP3

Accessing and configuring RP2/GRP3 settings via display.

Tune Instrument

Adjusting the overall pitch and tuning of the instrument.

MIDI Transmit Settings

Setting the MIDI channel for transmitting data.

MIDI Receive Settings

Setting the MIDI channel for receiving data.

Master Reset Function

Restoring all instrument settings to factory defaults.

MIDI Applications

Connections and Ports

Baldwin Pianovelle RP2 Specifications

General IconGeneral
BrandBaldwin
ModelPianovelle RP2
CategoryMusical Instrument
LanguageEnglish

Related product manuals