This document describes the Bali Outdoors 35" Round Steel Fire Pit, model number SRFP11716, with SKU 1719005. It is a user's manual providing assembly instructions, safety information, care, maintenance, and warranty details for the product.
Function Description
The Bali Outdoors 35" Round Steel Fire Pit is designed for outdoor use only as a recreational fire source. It is intended to burn charcoal and untreated wood only, providing warmth and ambiance in an outdoor setting. The fire pit comes with a screen to contain sparks and a screen hook for safe handling.
Important Technical Specifications
- Product Type: 35" Round Steel Fire Pit
- SKU: 1719005
- Model Number: SRFP11716
- Assembly Required: Yes (Adult assembly required)
- Estimated Assembly Time: 15 minutes
- Tools Required for Assembly (not included): Phillips screwdriver
- Maximum Fuel Capacity: Do not burn more than 1.6 lbs. of charcoal or 3 lbs. of untreated wood at one time.
- Minimum Clearance from Walls: The fire pit should be placed no closer than 24 inches from walls during use.
Parts List:
- A: Screen (Qty: 1)
- B: Safety Ring (Qty: 4)
- C: Fire Bowl (Qty: 1)
- D: Screen Hook (Qty: 1)
- E: Leg (Qty: 4)
Hardware List:
- AA: M5 x 10 Screw (Qty: 20)
- BB: M5 x 8 Tapping Screw (Qty: 4)
- CC: M6 Flange Nut (Qty: 1)
- DD: M6 Ring Screw (Qty: 1)
Usage Features
The fire pit is designed for straightforward use with several safety considerations:
- Outdoor Use Only: Strictly prohibited for indoor use due to carbon monoxide risk.
- Fuel Type: Exclusively for charcoal and untreated wood. Gasoline or kerosene must not be used to start fires.
- Safety Distance: Keep all flammable liquids away from the fire pit. Do not use under or on combustible structures/surfaces, including wooden decks. Maintain a minimum 24-inch distance from walls.
- Handling Tools: A long-handled fire tool (screen hook D) is provided for safe operation. Be aware that tool handles may become hot during and after use.
- Children Safety: Keep children away from the hot fire pit.
- Cooling Down: Allow the fire pit to cool completely before attempting to move it or place the protective cover. Do not place the protective cover too close to the fire pit when it's burning, and ensure no hot or burning debris gets inside the cover.
Maintenance Features
Regular care and maintenance are crucial for product safety and longevity:
Inspecting:
- Regular Checks: Inspect the fire pit regularly for product safety and longer product life.
- Cool Down Before Inspection: DO NOT attempt to inspect until the fire is COMPLETELY out and cooled down.
- Handle Security: Check handles to ensure they are secure.
- Damage/Rust: Check components for any signs of damage or rust.
- Repairs: If any component is damaged, do not operate until repairs are made.
Cleaning:
- Regular Cleaning: Clean regularly to promote safer use and longer product life.
- Cool Down Before Cleaning: DO NOT attempt to clean until the fire is COMPLETELY out and cooled down.
- Avoid Harsh Cleaners: DO NOT use oven cleaner or abrasive cleaners as they will damage the product.
- No Self-Cleaning Oven: DO NOT clean any part in a self-cleaning oven as it may damage the finish.
- Exterior Surfaces: Wipe with a mild dishwashing detergent or baking soda.
- Stubborn Surfaces: For stubborn surfaces, use a citrus-based degreaser and a nylon scrubbing brush.
- Rinsing: Rinse clean with water.
- Creosote Removal: Remove built-up creosote from components with a chimney cleaning product.
- Discoloration: Note that the finish may discolor slightly after repeated use.
Storage:
- Cool Down Before Storage: DO NOT move or store until the fire is COMPLETELY out and cooled down.
- Ash Disposal: Once the fire is out and coals are cold, remove ashes and dispose of them properly.
- Covering: Cover the outdoor fire pit with a protective cover (G - not explicitly listed in parts but mentioned in storage instructions, implying it's either an accessory or a generic instruction).
- Location: Store assembled in a location away from children and pets.
- Dry Storage: If a cover is not used, store the fire pit in a dry location to maximize product life.
- Warranty Period: One (1) year from the date of purchase for defects in material and workmanship.
- Replacement Parts: Defective parts will be supplied free of charge for consumer installation.
- Exclusions: Defects or damage from non-genuine parts, industrial/commercial/business use, shipment damage, alteration, product abuse, or misuse are not covered. Labor charges or incidental/consequential damage are also excluded.
- Proof of Purchase: Warranty is effective from the date shown on the purchaser's receipt.
- Customer Service: For warranty service, call 1-888-909-3888 (7:30 a.m. - 4:30 p.m., PST, Monday - Friday) or email customerservice@shinerich.us.
To Next Page
Need help?
General
