To Next PageTo Next Page
Need help?Do you have a question about the BALLARD L 1553-5 Series and is the answer not in the manual?
Provides an overview of the Lx1553-5 interface card for MIL-STD-1553 and other features.
Details the various Lx1553-5 models, their configurations, and part numbers.
Explains MIL-STD-1553 as a military aircraft LAN protocol for command-response communication.
Lists additional resources like API programming manuals and software distribution disk contents.
Provides contact information for technical support, sales, and general inquiries.
Encourages users to register for product updates and new information.
Details setting jumpers for hardware configuration, including termination resistors.
Step-by-step guide for physically installing the PCI or PCIe card into the computer.
Instructions for installing the necessary software drivers for the Lx1553-5.
Guide on assigning card numbers and testing the installed hardware and software.
Instructions for connecting the Lx1553-5 to the MIL-STD-1553 databus(es).
Describes CoPilot as a databus analyzer/simulator for the Lx1553-5, detailing its features.
Explains how to use the BTIDriver API to develop custom applications for the Lx1553-5.
Explains the function of the front panel LEDs and how they are controlled.
Describes how to use the included test utility and API function to verify hardware operation.
Details the PCI/PCIe interface capabilities provided by PLX Technology chipsets.
Describes the MIL-STD-1553 channel functionality levels: Bus Controller, Remote Terminal, Monitor.
Explains the use of discrete I/O pins for signaling, status, and triggering.
Details the IRIG timer functionality for time synchronization and data correlation.
Provides mechanical diagrams showing connector and jumper placement for Lx1553-5 models.
Specifies recommended mating connectors for LFH and twinax connectors used by Lx1553-5.
Lists and describes standard cable assemblies offered by Ballard Technology for Lx1553-5.
Details the pin assignments for various Lx1553-5 models' connectors (J1 and J2).
Explains the necessity of bus termination for MIL-STD-1553 databuses and impedance matching.
Compares transformer coupling and direct coupling methods for MIL-STD-1553 interfaces.
Summary of general specifications like compliance, memory, and MTBF.
Details on MIL-STD-1553, Discrete I/O, and IRIG interfaces.
Covers operating temperature range and mechanical dimensions/weight.
Details typical and maximum power consumption for LP1553-5 and LE1553-5.
States compatibility with the BTIDriver™ API.
Notes the preliminary release of the manual on March 11, 2009.
Notes the initial release of the manual on July 31, 2009.
General| Brand | BALLARD |
|---|---|
| Model | L 1553-5 Series |
| Category | Computer Hardware |
| Language | English |
