To Next PageTo Next PageWhat causes a run capacitor to fail in a Bally Refrigerators/Freezers/Warmers Refrigerator?
A run capacitor in your Bally Refrigerator might open, short, or blow due to: * Improper capacitor: Check the size and replace it. * Excessively high line voltage, over 110% of the rated maximum: Determine the reason and correct it.
Why is the liquid line frosted on my Bally Refrigerator?
If the liquid line on your Bally Refrigerator is frosted, cold, or sweating, consider these possibilities: * Restriction in the drier strainer: Replace the drier, evacuate, and re-charge. * Liquid line service valve partially closed: Open the valve fully or replace it if necessary.
Why is my Bally Refrigerator condensing unit so noisy?
If your Bally Refrigerator's condensing unit is noisy, consider the following: * Loose parts or mountings: Tighten all mounting parts and the shroud cover. * Tubing rattle or vibration: Reform tubing to be free of contact. * Bent fan blade causing excessive vibration: Replace the fan blade. * Fan motor bearings worn: Replace the fan motor.
General| Capacity | Varies by model |
|---|---|
| Temperature Range | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Material | Stainless steel |
| Door Type | Varies by model (e.g., single, double, glass door) |
| Shelves | Adjustable, number varies by model |
| Defrost Type | Varies by model (e.g., manual, auto) |
| Energy Efficiency | Varies by model |
Specifies required space around the unit for proper operation and access.
Details requirements for adequate airflow around the unit for efficient cooling.
Outlines the need for a strong, level floor to support the unit's weight and product load.
Details how to properly connect the unit to the power supply.
Procedure to verify the accuracy of the unit's thermometer.
Instructions for adjusting the needle on a dial thermometer.
Instructions for calibrating a digital thermometer display.
Describes the design and components of the low-profile evaporator system.
Explains the features of the plug-type, top-mount evaporator system.
Step-by-step guide for cleaning the interior and exterior of the unit.
