Balt Presentation Cart - Shelf, Caster, and Final Tightening

5
(Tighten all the screws at this time
using Allen Wrench (F)).
Slide Middle Shelf (P-6) Between Right &
Left Leg Assemblies (P-1 & P-2) and
attach Middle Shelf (P-5) using 4 each (A)
screws and 4 each (C) Square Nuts as
shown in illustration # 4.
Illustration # 4
Attach 2 Locking Casters (D)
to the front, and 2 Casters (E)
to the back of the unit.
Tighten all Casters using
Caster Wrench (G).
Attach Lower Shelf (P-5) to the Right & Left
Leg Assemblies (P1 & P2) using 4 each (B)
screws as shown in illustration # 4.
(Finger tighten only)
6.)
7.)
8.)
9.)
P-6
B
A
C
P-5
B
C
P-2
P-1