Note 2: If the mouse disconnects during initial staup, you can peorm a pairing operation as described below:
1. Keep the mouse powered o.
2. Inse the receiver into the computer.
3. Place the mouse as close as possible to the receiver.
4. While holding down the left button, right button, and scroll wheel button, power on the mouse.
5. Continue to hold down the 3 buttons for 4-5 seconds.
6. When the arrow on screen changes, power o the mouse.
7. Power the mouse on again to resume normal use.
Note1:Push in the area of the batte cover depicted above to open it.
To Previous Page
Loading...