To Next Page
D
Diana ElliottAug 9, 2025
What to do if my Bananza Air Handler motor does not operate?
- MMichael CampbellAug 9, 2025
If the motor of your Bananza Air Handler isn't working, there are several potential causes and solutions. First, ensure the main disconnect switch is turned ON. If it is, check for blown fuses in the disconnect or control transformer and replace them, resetting the breaker if necessary (with the disconnect off). Also, verify the wiring between the remote panel and air handler, replacing the switch if needed. Other potential issues include a cool-down timer that doesn't reset (replace the TD4 timer), a defective time delay relay (replace TR1), or a motor starter that isn't operating (replace the starter). Finally, check for a tripped motor overload, resetting it, ensuring the FLA setting is correct, and tightening screws on heater packs or the overload if applicable.
General