Need help?Do you have a question about the Bandai Namco TANK! TANK! TANK! and is the answer not in the manual?
General| Brand | Bandai Namco |
|---|---|
| Model | TANK! TANK! TANK! |
| Category | Arcade Game Machines |
| Language | English |
Use a Phillips head screwdriver to remove the protecting grill, being careful not to drop the screws.
Carefully lay the cabinet down to expose the compressor.
Rotate the fan by hand to align the set screw with the access hole for visibility.
Use a magnetic 4MM Allen wrench to carefully remove the M8 setscrew through the access hole.
Apply Threadlocker PX #24250 to the setscrew as instructed.
Reinsert the setscrew and torque it to 20 IN LB.
Turn the compressor cabinet to its top side up.
Install the protecting grill back in place.
To Next Page
