To Next PageTo Next PageHow to fix Bandai Namco Time Crisis 5 that won't start?
If your Bandai Namco Arcade Game Machine isn't starting, there are a few potential reasons. First, ensure the USB dongle is correctly inserted. Second, check all connectors to make sure they are connected. If these steps don't resolve the issue, the game PC board may be malfunctioning, and you should contact your distributor.
What to do if my Bandai Namco Time Crisis 5 monitor doesn't display images?
If the monitor of your Bandai Namco Arcade Game Machine isn't displaying images, the issue might be due to a disconnected connector between the monitor and the game PC board. To solve this, open the back panel and connect the connector. If the problem persists, the monitor or the game PC board itself may be malfunctioning and require replacement.
General| Release Year | 2015 |
|---|---|
| Genre | Light gun shooter |
| Number of Players | 1-2 |
| Display | LCD |
| Publisher | Bandai Namco Entertainment |
| Cabinet Type | Upright |
| Display Type | LCD |
| Platform | Arcade |
| Controls | Light gun, pedal |
| Developer | Namco |
| Cabinet | Standard |
Instructions for owners delegating installation, operation, or maintenance tasks.
Defines risk levels for safety and property damage precautions.
Defines the qualifications and roles of a 'Technician'.
Details essential safety measures for operating the machine.
Information on visibility, maintenance, and replacement of warning labels.
Provides physical dimensions of the machine when installed and disassembled.
Lists the weight of various machine components.
Details the contents of the Monitor tower (L) assembly package.
Details the contents of the Monitor tower (R) assembly package.
Details the contents of the Coin box assembly package.
Details the contents of the Signboard (L) assembly package.
Details the contents of the Signboard (R) assembly package.
Details the contents of the Signboard (C) assembly package.
Details the contents of the Gun tower (L) assembly package.
Details the contents of the Gun tower (R) assembly package.
Identifies key components of the machine's front assembly.
Identifies key components of the machine's rear assembly.
Lists unsuitable locations for machine installation.
Specifies required play zone dimensions and clearances for operation.
Details package dimensions for delivery route planning.
Instructions for moving the machine on the same floor.
Covers methods for transporting the machine.
Identifies individuals who should not play due to safety concerns.
General safety recommendations for players during gameplay.
Highlights parts essential for player and bystander safety.
Details inspections required before operating the machine.
Explains game rules, controls, and systems.
Describes the function of power and adjustment switches.
Guides for navigating and using Test Mode functions.
Describes warnings for mismatched settings between cabinets.
Shows remaining credits from the previous play session.
Shows credits used in the previous play session.
Shows total stages completed in the previous play session.
Allows setting game costs and free play options.
Configures game difficulty, player life, and other settings.
Checks gun assembly vibration and calibrates the gun sight.
Tests individual switches and controls for input/output.
Tests the monitor display with various patterns.
Adjusts sound volumes and requests specific audio tracks.
Shows operating time, play count, and other game-related data.
Allows initialization of various settings and system options.
Configures settings for automatic system restarts for maintenance.
General cleaning guidelines for machine components.
Procedures for machine installation and assembly by technicians.
Outlines technician requirements and workflow for assembly.
Step-by-step guide for assembling the front section of the machine.
Step-by-step guide for assembling the gun tower.
Instructions for adjusting the level adjusters for stability.
Guide for installing USB dongles onto the game PC board.
Steps for connecting the power cord and ground wire.
Specifies checks to perform after installation is complete.
Procedure for turning on the main power switch.
Confirms operations and settings after powering on the machine.
Checks gun assembly operation and sight calibration.
Procedures for servicing and repairing machine components.
Guidelines for periodic inspection and maintenance.
Guides for diagnosing and resolving common machine problems.
Lists error codes and their main causes and remedies.
Detailed steps for removing and replacing various machine parts.
Provides an overall illustration of machine components.
Diagram illustrating components of the front assembly.
Detailed parts breakdown for the monitor tower (L) assembly.
Detailed parts breakdown for the monitor tower (R) assembly.
Parts diagram for the ES3X assembly.
Parts diagram for the coin box assembly (part 1 of 2).
Parts diagram for the coin box assembly (part 2 of 2).
Parts diagram for the signboard assembly.
Parts diagram for the cord box assembly.
Parts diagram for the gun tower (L) assembly (part 1 of 2).
Parts diagram for the gun tower (L) assembly (part 2 of 2).
Parts diagram for the gun tower (R) assembly (part 1 of 2).
Parts diagram for the gun tower (R) assembly (part 2 of 2).
Parts diagram for the gun assembly.
Parts diagram for the pedal assembly.
Contains the first part of the machine's wiring diagram.
Contains the second part of the machine's wiring diagram.
Contains the third part of the machine's wiring diagram.
Contains the fourth part of the machine's wiring diagram.
Contains the fifth part of the machine's wiring diagram.
