What to do if B&B SF1600TL Inverter shows a Grid Fault?
If you encounter a grid fault with your B&B Inverter, first wait one minute to see if the grid returns to normal operation. Also, verify that the grid voltage and frequency meet the required standards. If the problem persists, disconnect the inverter from the grid and inspect the grid connection, including the wiring and interface. Finally, check the overall usability of the grid.
Why does my B&B SF1600TL show PV Over Voltage?
If your B&B Inverter indicates PV Over Voltage, check the panel's open-circuit voltage to ensure it is not close to or exceeding the maximum DC voltage. If the voltage is higher than the maximum DC voltage, please seek professional assistance.
What to do if B&B SF1600TL Inverter displays DCINJ High?
If your B&B Inverter displays a DCINJ High fault, try disconnecting the PV (+) and PV (-) from the DC input and then reconnecting them. Also, inspect the L and N lines for any connection issues. If the problem persists, seek professional support.
What to do if B&B SF1600TL Inverter has a Relay Fault?
If your B&B Inverter is showing a Relay Fault, disconnect the PV (+) and PV (-) from the DC input, then reconnect them. If it still doesn’t return to normal, please seek professional support.
How to fix Self Testing Fault on B&B SF1600TL Inverter (SF3600TL,SF4200TL,SF4600TL,SF5000TL)?
If your B&B Inverter (SF3600TL, SF4200TL, SF4600TL, SF5000TL models) shows a Self Testing Fault, ensure it is operating in IN1 & IN2 P mode. Also, check PV1 and PV2 to confirm that they are properly connected. If issues persist, seek professional assistance.
General| Max. DC Voltage | 550 V |
|---|---|
| Nominal AC Power | 1600 W |
| Nominal AC Voltage | 230 V |
| Max. Output Current | 7 A |
| Maximum DC Input Voltage | 550 V |
| Maximum Input Current | 12 A |
| Number of MPP Trackers | 1 |
| Nominal AC Frequency | 50/60 Hz |
| Power Factor | >0.99 |
| Cooling Method | Natural convection |
| Protection Degree | IP65 |
| Warranty | 5 years |
| AC Frequency Range | 47-53 Hz or 57-63 Hz |
| Operating Temperature Range | -25°C ~ +60°C |
To Next Page