-7-
LOADING
T
O PREVENT ACCIDENTAL INJURIES:
• Never place a hand or any other part of the body in nail discharge area of tool while
the air supply is connected.
• Never point the tool at anyone else.
• Never engage in horseplay.
• Never pull the trigger unless nose is directed at the work.
• Always handle the tool with care.
• Do not pull the trigger or depress the trip mechanism while loading the tool.
1. With magazine fully open, insert fasteners. Set
staples strip into the magazine and keep the
points of fasteners in contact with groove.
2. Push magazine forward to close.
To Next Page
Loading...