c. Using the setting tool with a M8 wrench, tighten the setting bolt with a M6 wrench
until tight – do not over tighten. This process will swell the threaded rivnut and cause it to remain in
the drilled hole.
d. Repeat Step 4(c) until all of the threaded rivnut are in place.
5) Return the Axe Blind to the boat and fasten it to the threaded rivnut with the provided M6 bolts.
6) Use a hand tool to tighten the M6 bolts into the threaded rivnut. Do not over-tighten as it can damage and/or
strip the threaded rivnut. Simply hand-tighten each bolt until snug.
Thank you for choosing the "Axe" Combo Boat/Shore Blind from Banded. We appreciate your business. If
you have any questions, please find our contact information below.
Easy Quick Warranty in under 5 minutes:
BANDED WARRANTY If within one (1) year from the date of purchase, the product fails due to a
defect in material or workmanship, BANDED will repair if possible or replace it free of charge with
product registration and proof of purchase. This warranty however does not apply to defects
caused by normal wear and tear on the item. This warranty applies only to the original purchaser.
Please retain your receipt for any warranty related issues.
To register your product for warranty you must visit www.banded.com. Click on Warranty at the top
of the home page and you are on your way.
Banded Holdings Inc.
1710 Powell St
Springdale, AR 72764
Phone (888) 992-6299
Email: info@banded.com
To Next Page
Loading...