Bandit43
MODEL SG-40 REPLACEMENT PARTS
FRAME
# Part Number Description
1 900-5914-89 Rubber Track
2 900-5914-27 Track Roller
3 900-4923-96 Track Roller Adjuster Bolt
4
900-4902-73 Track Roller Adjuster
900-4906-82 Track Roller Adjuster Nut
5 208-3002-25 Track Drive Sprocket
6 208-3002-19 Track Drive Motor Mount Plate
7 900-3978-18 Track Drive Motor
8 208-3002-23 Drive Motor Access Cover
9 208-3002-64 Pivot Access Cover
10 208-3001-86 Pivot Hub Plate
11 900-4909-41 Pivot Hub Nut
12 208-3001-13 Bulkhead Plate
# Part Number Description
13
208-1000-29 Spindle & Hub Assembly
900-5917-63 Hub Kit Only
900-5917-71 Jam Nut
900-5917-72 Cup & Stud Outer Hud
900-4914-00 Cone Nut
900-5911-75 Spindle Nut Retainer
900-6916-90 Dust Seal
900-5905-30 Dust Cap
900-1919-46 Inner/Outer Bearing
900-5911-97 Outer Bearing Cone
900-5911-13 Rubber Plug for Grease Cap
900-5912-70 “D” Washer
NOTICE NOTICE
Nuts, bolts, washers, and all other components
can be ordered by physical description.
Parts may not be exactly as shown.
To Next Page
