To Next PageTo Next Page
Need help?Do you have a question about the B&R Industries Panel PC 2100 and is the answer not in the manual?
Details revisions and changes made to the manual over different versions.
Guidelines for safe operation, handling, and installation of the device.
Recommendations for protecting devices during transport and storage.
Details on how to install the device, including EMC requirements and tools.
Guidelines for operating the device safely and under specified environmental conditions.
Guidelines for separating device components for environmentally friendly recycling.
Explains how safety notices (Danger, Warning, Caution, Information) are organized.
European dimension standards and general tolerance specifications.
Lists product IDs, short descriptions, and page numbers for components.
Overview of the manual's content regarding the Panel PC 2100 swing arm device.
Details on display units and system units that form the Panel PC.
Lists the necessary components required for a Panel PC 2100 swing arm device.
Details physical attributes of the Panel PC 2100 swing arm device.
Illustrates how to adjust the Panel PC's angle of rotation.
Lists the weight specifications for display units, system units, CFast cards, and handles.
Details operational limits related to temperature, humidity, vibration, and shock.
Lists minimum ambient operating temperatures for system units and components.
Provides ambient temperature limits for storing and transporting the complete system.
Lists minimum and maximum relative humidity values for operation and storage.
Details maximum vibration specifications for the complete system.
Details maximum shock specifications for the complete system.
Specifies the IP65 rating and the conditions under which it applies.
Details electrical properties including voltage supply, current, and isolation.
Provides methods to calculate total power consumption based on system unit and interface options.
Illustrates the internal components and connections of system units and interface options.
Provides an overview and numbering of the Panel PC's interfaces.
Details the controller, cabling, transfer rate, and LEDs for the ETH1 interface.
Details the controller, cabling, transfer rate, and LEDs for the ETH2 interface.
Describes the USB 3.0 and USB 2.0 interfaces, including type, transfer rate, and cable length.
Information about the CFast slot for removable media and upgrades.
Explains the ATX power supply functions of the power button.
Describes the hardware and PCI reset function of the reset button.
Details the color, status, and function of the Power, CFast, Link, and Run LEDs.
Information on the slot for interface options and compatible interface cards.
Describes interfaces, buttons, and switches on the front of devices with buttons.
Details the elements, types, and switching elements for buttons and transponders.
Provides the pinout for the button/switch interface and required accessories.
Details the front USB 2.0 interface, its protective cover, and usage.
Information on the RFID unit's function and compatible transponder tags.
Details on various display units, including general information and order data.
General information, order data, and technical specifications for the 15.0" display unit.
General information, order data, and technical specifications for the 19.0" display unit.
General information, order data, and technical specifications for the 18.5" multi-touch display unit.
General information, order data, and technical specifications for the 21.5" FHD multi-touch display.
General information, order data, and technical specifications for the 24.0" FHD multi-touch display.
Details general info, order data, and technical specs for the 18.5" display with buttons.
Details general info, order data, and technical specs for the 21.5" FHD display with buttons.
Details general info, order data, and technical specs for the 21.5" portrait display with buttons.
Details general info, order data, and technical specs for the 24.0" FHD display with buttons.
General information and order data for the Panel PC 2100 system units.
Details general info, order data, and technical specs for system units.
General information on CFast cards as reliable storage media for industrial environments.
Information on installing and replacing interface options on Panel PC units.
Details the POWERLINK and RS232 interface option, including order data and technical specs.
Danger notice and general installation notes for the Panel PC 2100.
Details the process of installing the Panel PC on a swing arm system.
Information on enabling individual components installed afterward in BIOS.
Step-by-step instructions for removing the interface cover for access.
Procedure for connecting necessary cables to the Panel PC interfaces.
Step-by-step guide for removing and replacing the system unit.
Instructions for installing the handles to improve ergonomic properties and ease of use.
Essential steps for connecting the device to the main power supply.
Details on wiring DC power cables using screw clamp or cage clamp terminal blocks.
Steps for connecting the power supply connector and tightening screws.
Explains functional ground paths, their purpose, and connection requirements.
Information on cable connections, emphasizing flex radius and locating screw torque.
Checklist and procedure for first-time device startup, including prerequisites.
Guidance on calibrating single-touch and multi-touch screens for different operating systems.
Instructions for adjusting display brightness via the Control Center.
Information about BIOS version, setup utility, and configuration settings.
Explains what BIOS is and its function as a standardized interface.
Details how to enter BIOS Setup and the system's boot sequence.
Explains how default settings are applied and represented in the BIOS.
Lists keys used during POST and within the BIOS Setup utility for navigation and control.
Describes the main BIOS setup screen and its primary functions.
Overview of advanced BIOS configuration options, including CPU, Graphics, LAN, and USB.
Details OEM-specific information and configuration options within the BIOS.
Configures settings for real-time operating systems and behavior after power loss.
Allows configuration of the onboard touch screen's serial port settings (Base Address, IRQ).
Displays device ID, compatibility ID, vendor ID, and other system board information.
Provides device ID, vendor ID, serial number, and temperature values for the display unit.
Displays device ID, compatibility ID, vendor ID, and statistical values for the IF option.
Configures CPU settings such as Execute Disable Bit, CPUID Maximum, and virtual machine support.
Configures graphics standby mode, memory allocation, and turbo boost settings.
Configures PXE boot features and Wake on LAN options for the Ethernet controller.
Configures PCI Express settings for root ports, PCIe speed, ASPM, and INT assignment.
Configures xHCI, EHCI controllers, and individual USB port settings for interface and multi-touch.
Configures SATA support, chipset SATA mode, and hot plugging for SATA interfaces.
Configures High-precision Timer and PCI MMIO size for system behavior.
Sets critical and passive trip points for CPU temperature to manage thermal behavior.
Manages supervisor and user passwords, including minimum length and authentication on boot.
Configures the boot order and other boot-related settings.
Allows selection and ordering of bootable devices for the system startup sequence.
Configures numeric keypad, timeout, CSM support, quick boot, and console redirection.
Options for saving changes, discarding changes, loading defaults, or exiting BIOS.
Details RAM and I/O address assignments for system resources.
Details on WE 8.1 Industry Pro OS, including general info, order data, and features.
Highlights Windows 7 features, performance improvements, and language support.
Describes WES7 as an embedded OS with security improvements and component options.
Describes Automation Runtime as the real-time OS kernel for applications on target systems.
System requirements and BIOS settings for ARwin operation.
System requirements for ARembt operation, including BIOS setting recommendations.
Lists functions provided by the ADI Control Center for device configuration and monitoring.
Software for accessing ADI functions from Windows applications using development environments.
Software for accessing ADI functions from .NET applications using Microsoft Visual Studio.
Tool for adapting function keys and LEDs directly to the application software.
General information and commands for reading and writing MIFARE and ISO 15693 tags.
Details on port settings, authentication, and storing keys for MIFARE configuration.
Information on port settings and general commands for ISO 15693 tag interaction.
Lists operating errors and RFID stack error messages for troubleshooting.
Lists applicable EC directives and harmonized EN standards for device compliance.
Indicates product compliance with applicable EU directives and harmonized EN standards.
Details compliance with EC directive 2004/108/EC for electromagnetic compatibility.
Details compliance with EC directive 2006/95/EC for low voltage safety.
Lists applicable certifications including UL, FCC, and IC for B&R products.
Information on UL testing and listing as 'Industrial Control Equipment' for USA and Canada.
States compliance with FCC and IC regulations for EMC requirements in USA and Canada.
Describes the 0TB103.9x single-row, 3-pin terminal blocks for voltage supply connection.
Details the 2-row, 10-pin TB1208 terminal block for connecting button/switch interfaces.
Information on USB flash drives as portable data storage, including hot plugging and reformatting.
General information, order data, and technical specifications for USB flash drives.
Danger notice and instructions for cleaning the device safely with a moist cloth and mild detergent.
Tips for extending backlight life and avoiding screen burn-in.
Defines screen burn-in, its causes, and methods to avoid it.
Information regarding defective pixels and their impact on warranty claims.
List of abbreviations used in the manual and their corresponding definitions.
Specifies viewing angle specifications (R, L, U, D) for display types.
Details chemical resistance of display unit overlays against various chemicals.
Lists chemicals resistant to the Autotex panel overlay over a 24-hour period.
Details chemical resistance of AMT and 3M touch screens for specific exposure periods.
Details features of RFID transponders, pushbuttons, selector switches, and key switches.
Provides technical data and supported tags for the RFID read/write transponder unit.
Technical specifications for the RAFIX 22 FS+ pushbutton with red illumination.
Technical specifications for the RAFIX 22 FS+ pushbutton with green illumination.
Technical specifications for the RAFIX 22 FS+ selector switch.
Technical specifications for the RAFIX 22 FS+ key switch.
Technical specifications for the RAFIX 22 FS+ E-stop button.
Technical specifications for the RAFIX 22 FS universal switching element.
Technical specifications for the RAFIX 22 FS+ PCB gold switching element.
Technical data including certification, manufacturer, technology, and environmental conditions.
Technical data including certification, manufacturer, technology, and environmental conditions.
General| Brand | B&R Industries |
|---|---|
| Model | Panel PC 2100 |
| Category | Touch Panel |
| Language | English |
