B&R 6PPT30.043F-20B User Manual

Power Panel T30
User's manual
Version: 1.42 (November 2018)
Model no.: MAPPT30-ENG
Translation of the original documentation
All values in this manual are current as of its publication. We reserve the right to change the contents of this manual
without notice. B&R Industrial Automation GmbH is not liable for technical/editorial errors or incomplete information
in this manual. In addition, B&R Industrial Automation GmbH shall not be liable for incidental or consequential
damages in connection with or arising from the furnishing, performance or use of this material. We point out that the
software and hardware names and brand names of the respective companies used in this document are subject
to general trademark, brand or patent protection.

B&R 6PPT30.043F-20B Specifications

General

Brand	B&R
Model	6PPT30.043F-20B
Category	Industrial Monitor
Language	English

Summary

1 General information

1.2 Safety guidelines

Provides essential safety instructions for operating and handling the device.

3 Device description

3.2 General technical data

Lists key technical specifications, including processor, memory, and interfaces.

3.3 Power Panel T30 - 4.3" variants

3.4 Power Panel T30 - 5.7" variants

3.5 Power Panel T30 - 7.0" variants

3.6 Power Panel T30 - 10.1" variants

3.7 Connection elements

Describes the various connectors and interfaces available on the Power Panel.

4 Commissioning

4.1 Installation

Covers the essential steps and precautions for installing the Power Panel device.

4.2 Instructions for use in Ex zone 2 / 22

Specifies safety guidelines for operation in explosive atmospheres.

4.3 Operating the Power Panel

Explains how to use the touch screen, keyboard, and mouse for device operation.

5 Configuration

5.1 Service pages

Introduces the service pages for configuring the Power Panel via its integrated interface.

5.1.1 Overview

5.1.2 Service page Startup

Defines how the Power Panel behaves upon startup, including VNC and Web modes.

5.1.3 Service page Network

Details network configuration settings like hostname, DHCP, and DNS.

5.1.4 Service page Time

5.1.5 Service page Screen

5.1.7 Service page Hand button

5.1.8 Service page VNC

Sets up the Power Panel as a VNC client for remote HMI access.

5.1.9 Service page Web

Configures the Power Panel as a web client for displaying web-based applications.

5.1.10 Service page Storage

5.1.11 Service page Update

Describes methods for updating the Power Panel system, boot logo, and settings.

5.1.12 Service page Backup & Reset

Provides functions for backing up system data and performing factory resets.

5.1.13 Service page Security

5.1.14 Service page OPC UA

5.1.15 Service page Save & Exit

5.2 Update

Details methods for updating the Power Panel system, boot logo, and settings.

6 Software-specific information

6.4 RFB extension

6.6 OPC UA server

6.7 Touch keys as data points via OPC UA

Explains how touch key states are exposed as data points via OPC UA.

7 Maintenance

7.1 Cleaning

7.2 User tips for increasing the service life of the display or touch screen

9 International and national certifications

9.2 EU directives and standards (CE)

ATEX Directive 2014/34/EU

9.2.2 Requirements for immunity to disturbances

9.2.4 Mechanical conditions

9.2.5 Electrical safety

Covers overvoltage categories, pollution degree, and IP protection ratings.

9.3 Underwriters Laboratories (UL)

9.4 Det Norske Veritas - Germanischer Lloyd