To Next PageTo Next Page
Need help?Do you have a question about the B&R Automation PC 910 and is the answer not in the manual?
General| Brand | B&R |
|---|---|
| Model | Automation PC 910 |
| Category | Industrial PC |
| Language | English |
Details the version history and changes made to the user manual.
Specifies the intended industrial environment and warns against high-risk applications.
Guidelines for handling electrical components to prevent ESD damage.
Outlines user responsibility for system safety and bringing connected devices to a safe state.
Recommendations for protecting devices during transport and storage.
Instructions for safe mounting, operation, and environmental considerations.
Information on environmentally friendly recycling and material separation.
Explains the structure of safety notices and provides general dimension guidelines.
Overview of the APC910's Intel Core i-series processor and design for industrial applications.
Lists the main features of the APC910, including processor, memory, and connectivity.
Details essential system components and base system configuration with fan kit.
Explains system configuration options including accessories and operating systems.
Provides complete device specifications, starting with temperature details.
Specifies maximum ambient temperatures with and without a fan kit for various configurations.
States the minimum permissible ambient temperature for the Automation PC 910.
Details temperature sensors, monitoring methods, and their locations on the device.
Lists minimum and maximum relative humidity for individual components during operation and storage.
Illustrates the supply voltage block diagram and power management features.
Provides power calculation tables for 5PC910.SX01-00 and 5PC910.SX02-00 system units.
Shows block diagrams for different system unit and bus unit combinations.
Provides an overview of all external device interfaces, including front and top views.
Details the 24 VDC supply connection and grounding concepts for system stability.
Specifies the pin assignments for the RS232 serial interface COM1.
Overview of video signals available for monitor/panel output and SDL transfer details.
Details the DisplayPort 1.1 output signals and pin assignments.
Provides technical data for Ethernet 1 (ETH1) and Ethernet 2 (ETH2) connections.
Details the specifications for USB 3.0 (USB1-4) and USB 2.0 (USB5) ports.
Information on IF option slots 1 and 2 for installing interface modules.
Specifies the maximum dimensions for standard PCI and PCIe half-size cards.
Explains the meaning and timing of the status LEDs on the system unit.
Describes the functions of the power button and the hardware/PCI reset button.
Details the RTC battery function and the CFast slot for removable storage.
Information on the slide-in compact slot for drives and its SATA 0 connection.
General information, order data, and technical data for the 5PC910.SX01-00 system unit.
General information, order data, and technical data for the 5PC910.SX02-00 system unit.
Details on QM77 chipset CPU boards, including order data and technical specifications.
Details on HM76 chipset CPU boards, including order data and technical specifications.
Technical data for 204-pin DDR3 main memory modules.
Technical data for bus units supporting PCI and/or PCI Express slots.
Information on active and passive heat sinks for thermal management.
Details on fan kits for improved heat dissipation in system units.
Technical data for SATA hard disk drives and SSDs (SLC/MLC).
Information about the CFast adapter for slide-in compact slots.
Details the RS232/422/485 interface option and its technical specifications.
Provides information on the CAN master interface option and its specifications.
Details the HDA sound chip interface option with MIC, Line IN, and Line OUT.
Technical specifications for the 2 MB SRAM interface option.
Details on DisplayPort and Smart Display Link/DVI transmitter options for displays.
Information on front covers for protecting system unit ports from contaminants.
Covers essential mounting information, procedures, and mounting plate details.
Illustrates approved vertical and horizontal mounting orientations for the APC910.
Specifies minimum spacing requirements for adequate air circulation around the unit.
Provides information on cable connections, emphasizing the flex radius specification.
Explains the functional ground connection for improving disturbance immunity.
General information, order data, and overview of Windows 7 versions for B&R PCs.
Guides on installing Windows 7 and obtaining necessary drivers.
General info, order data, and overview for Windows Embedded Standard 7.
Details WES7 features, installation procedures, and driver requirements.
Information, order data, overview, installation, and drivers for Windows XP Professional.
General info, order data, overview, and features for WES2009.
Instructions for installing WES2009 and obtaining the required drivers.
Describes the ADI Control Center for accessing B&R device functions and settings.
Steps for installing the ADI driver and Control Center software.
Information on the ADI Development Kit for accessing functions from Windows applications.
Details the ADI .NET SDK for .NET applications using Visual Studio.
Details on 3-pin terminal blocks used for connecting the supply voltage.
Information on lithium batteries needed for BIOS CMOS and real-time clock backup.
Technical data, order information, and dimensions for CFast storage cards.
Technical data and specifications for USB 2.0 flash drives.
Details on the USB Media Drive with DVD, CompactFlash, and USB interfaces.
Information on the front cover for protecting USB media drive interfaces.
Technical data and pin assignments for DVI-D cables.
Technical data and specifications for standard SDL cables.
Technical data for SDL cables featuring 45° connectors.
Technical data for flexible SDL cables suitable for dynamic installations.
Specifications for flexible SDL cables that include an extender unit.
Technical data and pinout for USB 2.0 type A to type B cables.
Technical data and pinout for RS232 extension cables.
Procedure for safely replacing the CFast card in the Automation PC 910.
Step-by-step guide for installing interface options into the system unit.
Procedure for installing monitor or panel options into the Automation PC.
Instructions for installing or replacing slide-in compact drives.
Procedure for installing or replacing standard slide-in drives.
Steps for removing and replacing the fan filter to maintain cooling efficiency.
Detailed instructions for replacing the fan kit in the Automation PC 910.
Defines common abbreviations used throughout the user manual.
