Need help?Do you have a question about the Bang & Olufsen BEOGRAM 1202 and is the answer not in the manual?
General| Drive system | Belt drive |
|---|---|
| Weight | 6.5 kg |
| Stylus pressure | 1.5 - 2.5 g |
| Record weight | up to 180 g |
| Motor | AC synchronous motor |
| Power consumption | 10 W |
| Type | Belt drive turntable |
| Speeds | 33, 45 rpm |
| Cartridge | Moving magnet |
| Record size | 12 inch |
| Power supply | 220-240 V AC, 50 Hz |
| Platter | Aluminum platter |
Removal of turntable/Demontierung des Plattentellers.
Circuit diagram for the pre-amplifier unit.
Printed circuit board layout for the pre-amplifier.
List of components for the pre-amplifier.
Explanation of how the automatic control circuit operates.
Description of the chassis mounting system for vibration resistance.
Explanation of the antiskating mechanism using balls.
Information on mechanical vernier speed adjustment.
How the cam-lifting wheel engages with the turntable gear.
Description of the automatic pickup arm cueing process.
Mechanism for lowering the pickup arm onto the record.
Adjustment procedure for motor height.
Adjustment procedure for pickup arm height.
Adjustment procedure for pickup arm downstroke.
Procedure for ensuring pickup arm parallelism.
List of parts for Beogram 1202.
List of parts for Beogram 3000.
Additional parts list cross-reference.
Procedure for mounting the pickup arm correctly.
Instructions for removing the turntable hub.
Important safety warning regarding relay housing assembly.
Information on mounting the Beogram 3000 dust cover.
Details on the modified arm positioning guide.
To Next Page