What to do if Bang & Olusen Answering Machine does not answer a phone call when ringing?
If your Bang & Olufsen Answering Machine isn't answering calls, the answering function might be deactivated, or the ringing time might be too long. To resolve this, activate the answering machine function and set the ringing time.
Why the answering machine function cannot be activated on Bang & Olufsen BeoTalk 1200?
The answering machine function on your Bang & Olufsen Answering Machine cannot be activated because no announcement has been recorded for the type of announcement chosen. Record an announcement and activate the type of announcement.
What to do if it is not possible to record a new announcement on Bang & Olufsen BeoTalk 1200 Answering Machine?
If you cannot record a new announcement on your Bang & Olufsen Answering Machine, it is because the memory is full. While playing the announcement, press C to delete the old announcement.
Why Voice Announcement, Group Announcement and Rejection of incoming calls do not function on Bang & Olufsen Answering Machine?
If Voice Announcement, Group Announcement, and Rejection of incoming calls aren't working on your Bang & Olufsen Answering Machine, the complete telephone number, including area code, has not been stored in the lists. Store the complete number (at least three and maximum 13 digits). Please note that in some regions you need not to enter the area code. This you will know by looking at the display seeing how the incoming phone numbers are shown. You must store your numbers in the same way.
Why Silent Answer cannot be activated on Bang & Olufsen BeoTalk 1200 Answering Machine?
If Silent Answer cannot be activated on your Bang & Olufsen Answering Machine, it is because the answering machine function has not been activated. Activate the answering function.
What to do if BeoTalk 1200 continues to play the announcement after I have answered the call on Bang & Olufsen Answering Machine?
If your Bang & Olufsen Answering Machine (BeoTalk 1200) continues to play the announcement after you answer, it hasn't registered that you've answered the call. Briefly replace the handset, or press the NEWS or STORE key on BeoTalk 1200.
Why BeoTalk 1200 executes commands I have not asked for while playing messages using remote control on Bang & Olufsen Answering Machine?
If your Bang & Olufsen Answering Machine (BeoTalk 1200) executes commands you haven't requested while playing messages via remote control, it is because a message contains DTMF tones. You can press and continue the operation, or replace the handset and call again.
What to do if BeoTalk 1200 answers a Ring Back on Bang & Olufsen Answering Machine?
If your Bang & Olufsen Answering Machine (BeoTalk 1200) answers a Ring Back, it's registering the call as an ordinary call. Deactivate the answering machine function until the Ring Back has been concluded.
What to do if BeoTalk 1200 is 'dead' on Bang & Olufsen Answering Machine?
If your Bang & Olufsen Answering Machine (BeoTalk 1200) appears 'dead', it might be incorrectly connected. Check the connection.
What to do if Bang & Olufsen Answering Machine does not answer a phone call when ringing?
If your Bang & Olufsen Answering Machine isn't answering calls, first ensure the answering function is activated. If it is, check the ringing time setting, as a too-long ringing time can prevent the answering machine from picking up the call. Activate the answering machine function or set the ringing time to resolve this.
General| Brand | Bang & Olufsen |
|---|---|
| Model | BeoTalk 1200 |
| Category | Answering Machine |
| Language | English |
To Next Page
