Need help?Do you have a question about the Bang-Olufsen BeoSound Ouverture 2636 and is the answer not in the manual?
General| Brand | Bang-Olufsen |
|---|---|
| Model | BeoSound Ouverture 2636 |
| Category | Stereo System |
| Language | English |
Details of the first module, likely related to receiver or sounder functionality.
Information about the microcomputer module, often central to device control.
Covers the display module, responsible for user interface output.
Details the keyboard module, used for user input and control.
Further information on the display module.
Information on the receiver and sensor module.
Details the module for controlling tape data.
Covers the CD servo motor system module.
Information on the CD decoder module.
Details the amplifier and motor control module.
General specifications and overview of the product.
Detailed technical specifications for performance and features.
Information about the product's connection ports and interfaces.
Details on product measurements and physical dimensions.
Specifications for PCB 1, a key component.
Details related to the power supply unit.
Physical dimensions of the device.
Information on the device's power usage.
Wiring for specific types in North America.
Wiring for other specific types in North America.
Wiring for European and Canadian models.
Instructions for basic user operations.
How to use the radio function.
Instructions on tuning radio stations.
Operation of tape deck controls.
Detailed steps for operating the radio.
Guide to adjusting FM reception.
Explanation of component layout and control systems in diagrams.
Information on wiring corrections for diagrams.
Details on supply voltages shown in diagrams.
Explanation of ground symbols used in circuit diagrams.
Clarifies basic symbols found in circuit diagrams.
Diagram showing the overall wiring connections of the unit.
Illustrates the functional blocks of the tuner section.
Shows the functional blocks related to tape playback and recording.
Illustrates the functional blocks of the CD player.
Details the functional blocks for overall system control.
Illustrates the functional blocks of the power supply unit.
Detailed circuit diagram for Tuner, RF, and CD Decoder sections.
Layout drawing for the RF Tuner printed circuit board.
Layout drawing for Printed Circuit Board 1.
Detailed circuit diagram for tape data control.
Detailed circuit diagram for tape AF and amplifier control.
Detailed circuit diagram for Dolby and tape logic.
Detailed circuit diagram for the CD servo motor system.
Detailed circuit diagram for the CD decoder.
Detailed circuit diagram for the Master Link interface.
Detailed circuit diagram for input and select functions.
Layout drawing for Printed Circuit Board 12.
Layout drawing for Printed Circuit Board 13.
Detailed circuit diagram for the microcomputer.
Detailed circuit diagram for the Master Link microcomputer.
Detailed circuit diagram for IR receiver and door sensor.
Layout drawing for Printed Circuit Board 5.
Layout drawing for Printed Circuit Board 6.
Detailed circuit diagram for the display and keyboard.
Detailed circuit diagram for light and motor control.
Detailed circuit diagram for the hard data system.
Detailed circuit diagram for the power supply unit.
Layout drawing for Printed Circuit Board 15 (Transformer).
Electrical parts list for PCB 1, 8001413.
Components for FM/AM, RF, and IF decoder sections.
Electrical parts list for PCB 3, 8001761 (Microcomputer).
Components for the microcomputer.
Electrical parts list for PCB 8, 8005275 (CD).
Components for the CD section.
Electrical parts list for PCB 5, 8001309 (Display).
Components for the display unit.
Electrical parts list for PCB 8, 8001753 (IR receiver and door sensor).
Components for IR receiver and door sensor.
Electrical parts list for PCB 6, 8001753 (IR receiver and door sensor).
Components for IR receiver and door sensor.
Electrical parts list for PCB 1, 8001753 (Backlight).
Components for the backlight.
Electrical parts list for PCB 7, 8004913 (Tape).
Components for the tape mechanism.
List of resistors with specifications.
List of capacitors with specifications.
Electrical parts list for PCB 8, 8005275 (CD).
Components for the CD section.
Electrical parts list for PCB 7, 8001769 (Microcomputer).
Components for the microcomputer.
Electrical parts list for PCB 9, 8001550 (Light and motor control).
Components for light and motor control.
List of transistors TR1 through TR7.
List of transistors TR8 through TR21.
List of transistors TR22 through TR25.
List of transistors TR26 through TR30.
List of resistors with specifications.
List of capacitors with specifications.
List of resistors with specifications.
List of capacitors with specifications.
List of capacitors C78 through C134.
List of fuses and coils.
Electrical parts list for PCB 13, 8001769 (Master Link Microcomputer).
Components for the Master Link Microcomputer.
Electrical parts list for PCB 14, 8001736 (Master Link Audio interface).
Components for the Master Link Audio interface.
Electrical parts list for PCB 15, 8001824 (Transformer).
Components for the transformer.
Electrical parts list for PCB 17 (Tuner).
Components for the tuner.
Electrical parts list for PCB 28, 3358279 (Headphone).
Components for the headphone output.
Electrical parts list for PCB 29, 8001781 (RDS).
Components for the RDS system.
List of resistors with specifications.
List of capacitors with specifications.
List of connectors.
Exploded view of mechanical parts at the front of the unit.
List of mechanical parts for the front panel.
List of mechanical parts for the chassis.
Exploded view of mechanical parts within the chassis.
List of mechanical parts related to the chassis.
List of screws and bushes used in assembly.
List of mechanical parts for tone handles.
List of parts and chassis components.
Reference to the owner's manual.
Guidance for setting up the device.
List of mechanical parts for the tape deck.
List of mechanical parts for the tape deck.
Mechanical parts for BeoSound 3000, Type 2651.
Indicates parts relevant to the next section.
List of mechanical parts not visually represented.
Instructions for entering and operating in test mode.
Procedures for adjusting RF components.
Tips for repairing specific components.
Procedures for adjusting AM tuner.
Adjustment procedures for the detector section.
Procedures for adjusting FM tuner.
Adjusting the FM display.
Adjusting the FM offset.
Adjusting the FM stop level.
Adjusting height and azimuth on the tape recorder.
Adjusting height and tape guide.
Adjusting azimuth on side 1 of the tape head.
Adjusting azimuth on side 2 of the tape head.
Adjustments for right and left channels.
Adjusting noise reduction settings.
Adjusting the tape speed.
Adjusting the playback level.
Adjustments performed in test mode.
Adjusting recording boost levels.
Adjusting the HX filter.
Adjusting the bias filter.
Adjusting Cr bias.
Adjusting Fe bias.
Adjusting MP bias.
Adjusting recording current for Cr bias.
Adjusting recording current for MP bias.
Adjusting automatic record level.
General electrical adjustment section for the CD player.
Adjusting laser current.
Adjustment procedures for the CD player.
Adjusting the focus offset of the laser.
Procedure to check the laser supply.
Instructions for dismantling PCB under tape transport mechanism.
Chart detailing lubrication points and lubricants.
Procedure for replacing the CD transport mechanism.
Instructions for removing the gearbox for the CD clamp.
Procedure for removing the tape recorder transport mechanism.
Instructions for the wire system of the glass doors.
Procedure for dismounting rail A.
Procedure for dismounting rails D and C.
Instructions for mounting the wire for glass doors.
Procedure for readjusting the wire.
How to display the tuner variant.
How to display the SW version.
Performing a display test.
Performing a ROM/RAM test.
Testing open/close function for AAL data.
Testing open/close for Master Link signal.
Procedure for deleting all preset programs.
Instructions for service program of the CD section.
List and explanation of CD player error messages.
Checking IR door sensors on PCB6.
Testing Master Link DATA receiver/transmitter.
Table of wow frequencies and their error sources.
Information on door sensors for BeoSound Ouverture.
Information on door sensors for BeoSound 4000.
Electrical parts for PCB 8, 8001753 (IR receiver and door sensor).
Components for IR receiver and door sensor.
Electrical parts for PCB 16, 8001943 (Door sensor, right).
Components for the right door sensor.
Detailed circuit diagram for IR receiver and door sensor.
Layout for PCB 6 (IR receiver/door sensor, left).
Layout for PCB 10 (Door sensor, right).
To Next Page
